AT-UHD-EX-100CE-KIT *** Discontinued ***

AT-UHD-EX-100CE-KITs_1600x742

AT-UHD-EX-100CE-KIT *** Discontinued ***

AT-UHD-EX-100CE-KIT

  • 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling
  • HDCP 2.2 compliant
  • Supports 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
  • HDBaseTTM extender kit for HDMI®, Ethernet, power, and control up to 330 feet (100 meters)
  • Receiver powered by transmitter via PoE (Power over Ethernet)
  • Extends RS-232, IR, CEC, and Ethernet control signals over HDBaseT
  • Multi-channel audio compliant for all PCM, Dolby®, and DTS® formats

Learn more about Atlona’s 4K HDR integration products for residential and commercial applications.

SKU: AT-UHD-EX-100CE-KIT Category:

NOTE: The AT-UHD-EX-100CE-KIT is discontinued. The recommended replacement product is the AT-AVA-EX100CE-BP-KIT.

The Atlona AT-UHD-EX-100CE-KIT is an HDBaseT transmitter/receiver kit for HDMI transmission up to 330 feet (100 meters) over category cable with Ethernet, RS-232, and IR control pass-through, plus Power over Ethernet. This extender kit transmits video signals up to 4K/UHD @ 60Hz with embedded multi-channel audio and remote 48V power for the receiver. Additionally, the kit extends Ethernet, RS-232, and 12 volt-based IR control commands. The kit is HDCP 2.2 compliant and supports EDID communication. Both transmitter and receiver feature quarter rack width metal enclosures for easy rack mounting with rear panel I/O ports for uncluttered wire management.  Use with an optional AT-IR-CS-RX IR receiver cable to capture IR remote commands for AV system control.

The AT-UHD-EX-100CE-KIT provides integrator-friendly features including: IEEE standards based PoE transmission for safety and compatibility; compliant with HDCP 2.2 to meet the latest copy protection requirements; an integrator-friendly form factor with rear panel HDBaseT, HDMI, control and power connections; a rack- mountable form factor that allows for four transmitters to share a single, 1U rack tray; power chaining to allow multiple sets to be powered from one power supply; and a front mounted USB port for easy firmware updates.

Atlona UHD-EX Series

The AT-UHD-EX-100CE-KIT is part of the Atlona UHD-EX Series of HDBaseT extenders. See below for a complete listing of transmitters, receivers, and extender kits.

WordPress Tables Plugin

* To achieve optimal HDBaseT performance, CAT6a or CAT7 shielded twisted pair cable is highly recommended.

Atlona HDR-EX Series

Also available from Atlona are the HDR-EX Series for extending 4K HDR and control signals over HDBaseT.

WordPress Tables Plugin

Features

4K/UHD capability

  • Compatible with Ultra High Definition sources and displays
  • Full support of 4K/UHD streaming services and playback devices

HDCP 2.2 compliant

  • Adheres to latest specification for High-bandwidth Digital Content Protection
  • Allows protected content stream to pass between devices

Supports 4K HDR10 @ 24 Hz

  • Extends 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)

Remote-powered receiver

  • Industry standard IEEE 802.3af PoE for receiver is supplied by transmitter over HDBaseT
  • Saves time and integration costs

Extended distance HDMI extension

  • Transmits HDMI signals up to 330 ft (100m) @ 1080P with CAT5e/6 or 4K/UHD using CAT6a/7 cable
  • Uses easy-to-integrate category cable for low-cost, reliable system installation

AV, Ethernet, power, and control over HDBaseT

  • Delivers 4K/UHD video, audio, 100Base-T Ethernet, power, and control through a single cable
  • Eliminates multiple cable runs between source, control system, router, and display

Rear panel I/O connectors

  • Placement of ports on rear panel simplifies wire management
  • Saves installation time and eliminates clutter

Multi-channel audio compliant

  • Supports PCM, Dolby Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, DTS:X™
  • Allows any multi-channel audio stream to be used within a professional audio system

Field updatable firmware

  • Front panel USB port provides an easy means for kit upgrades
  • Ensures long term system return on investment

Front panel Power and Link status LEDs

  • LED indicators provide power and HDBaseT link status information
  • Provides easy setup and troubleshooting

Power chaining

  • Included power supply provides ample power for up to three Atlona HDBaseT extenders
  • Four Atlona HDBaseT extenders can be powered using the optional AT-PS-483125-C power supply
  • Reduces clutter from multiple power supplies in equipment racks

Low-profile, 1 inch (2.5 cm) high quarter rack-width enclosure

  • Easy installation into racks and confined spaces behind displays
  • Keeps devices out-of-sight when placed in public spaces

Included accessories

  • User guide, desktop power supply for transmitter, detachable power cable, IR emitter P/N AT-IR-CS-TX, mounting brackets

Product Warranty

Video
HDMI 2.0
HDCP 1.4 / 2.2
Video 4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p, 1920x1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1920x1080i@50/59.94/60Hz, 1280x720p@50/59.94/60Hz, 720x576p@50Hz, 720x576i@50Hz, 720x480p@60Hz, 640x480i@60Hz
VESA @ 60Hz 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480
Colorspace YCbCr, RGB
Chroma Subsampling 4:4:4, 4:2:2, 4:2:0
Color Depth 8-bit, 10-bit, 12-bit
HDR 4K HDR10 @ 24Hz, 4:2:0 chroma subsampling, 10-bit color
(Source signal delivered from Ultra HD Blu-ray as 4K @ 24Hz 4:2:2. Not compatible with HDR10 @ 60Hz.)
Audio
Formats PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, Dolby Digital+, Dolby TrueHD, Dolby Atmos, DTS Digital Surround, DTS-HD Master Audio, DTS:X
Sample Rate 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit Rate up to 24-bit
Distance
CAT5e/6 @ 4K up to 70 meters up to 230 feet
CAT6a/7 @ 4K up to 100 meters up to 330 feet
CAT5e/6 @ 1080p up to 100 meters up to 330 feet
HDMI IN/OUT @ 4K up to 5 meters up to 15 feet
HDMI IN/OUT @ 1080p up to 10 meters up to 30 feet
Connectors and Indicators
HDMI IN/OUT (TX/RX) 1 – Type A, 19-pin
HDBaseT OUT/IN (TX/RX) 1 – RJ45 (8P8C)
LAN (RX/TX) 1 – RJ45, 10/100/1000 Mbps
IR IN/OUT (TX) 1 – 4-pin captive screw
IR IN/OUT (RX) 1 – 5-pin captive screw
RS-232 (RX/TX) 1 – 3-pin captive screw
Power (RX/TX) 1 – 2-pin, 48V captive screw
LEDs 1 – PWR, green
1 – LINK, amber
Power
Total Power Consumption 12W
External Power Supply (optional)
AT-PS-483125-C		 Input: 100-220VAC, 50/60Hz
Output: 48V/0.8A DC
Safety CE, FCC, RoHS, cULus, RCM, CCC
Temperature
Operating 0°C to 50°C 32°F to 122°F
Storage -20°C to 60°C -4°F to 140°F
Humidity 20 to 90% non-condensing
Dimensions Inches Millimeters
Unit 0.98 x 4.29 x 3.50 25 x 109 x 89
Unit w/feet/ears 1.06 x 4.69 x 3.50 27 x 119 x 89
Power Supply 1.42 x 1.81 x 4.41 36 x 46 x 112
Chassis
Weight 0.30kg 0.86lbs
Safety CE, FCC

* 4096×2160@50/60Hz & 3840×2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only

Applilcation-Mockups-EX-100CE
Applilcation-Mockups-100CE

Documentation

pdf-icon Datasheet
pdf-icon Manual

International Documentation

pdf-icon Fiche Produit Francais

Declaration of Conformity

pdf-icon AT-UHD-EX-100CE-KIT
pdf-icon EC AT-UHD-EX-100CE-KIT

CAD File

cad-icon-(1) AT-UHD-EX-100CE-RX
cad-icon-(1) AT-UHD-EX-100CE-TX

Related Products

WordPress Tables Plugin

Similar Products

WordPress Tables Plugin

AT-UHD-EX-100CE-KIT Firmware

Firmware AT-UHD-EX Valens Firmware Version x.31.31.5
File Size 1.69 MB
Date 10.01.18

Release Notes

Version x.31.31.5

Features

  • Added CRC validity check of firmware images.

Bug Fixes

  • Resolved an issue where video was dropping, momentarily, following a disconnect-reconnect of the source device.
  • Fixed an issue with 720p60 10bpc, using Quantum Data pixel error test results.
  • Improved HDMI performance at low pixel clock speeds (< 100 MHz ).
  • Improved HDMI error filtering.

Sign up for updates

Notify Me!
Overview

NOTE: The AT-UHD-EX-100CE-KIT is discontinued. The recommended replacement product is the AT-AVA-EX100CE-BP-KIT.

The Atlona AT-UHD-EX-100CE-KIT is an HDBaseT transmitter/receiver kit for HDMI transmission up to 330 feet (100 meters) over category cable with Ethernet, RS-232, and IR control pass-through, plus Power over Ethernet. This extender kit transmits video signals up to 4K/UHD @ 60Hz with embedded multi-channel audio and remote 48V power for the receiver. Additionally, the kit extends Ethernet, RS-232, and 12 volt-based IR control commands. The kit is HDCP 2.2 compliant and supports EDID communication. Both transmitter and receiver feature quarter rack width metal enclosures for easy rack mounting with rear panel I/O ports for uncluttered wire management.  Use with an optional AT-IR-CS-RX IR receiver cable to capture IR remote commands for AV system control.

The AT-UHD-EX-100CE-KIT provides integrator-friendly features including: IEEE standards based PoE transmission for safety and compatibility; compliant with HDCP 2.2 to meet the latest copy protection requirements; an integrator-friendly form factor with rear panel HDBaseT, HDMI, control and power connections; a rack- mountable form factor that allows for four transmitters to share a single, 1U rack tray; power chaining to allow multiple sets to be powered from one power supply; and a front mounted USB port for easy firmware updates.

Atlona UHD-EX Series

The AT-UHD-EX-100CE-KIT is part of the Atlona UHD-EX Series of HDBaseT extenders. See below for a complete listing of transmitters, receivers, and extender kits.

WordPress Tables Plugin

* To achieve optimal HDBaseT performance, CAT6a or CAT7 shielded twisted pair cable is highly recommended.

Atlona HDR-EX Series

Also available from Atlona are the HDR-EX Series for extending 4K HDR and control signals over HDBaseT.

WordPress Tables Plugin

Features

4K/UHD capability

  • Compatible with Ultra High Definition sources and displays
  • Full support of 4K/UHD streaming services and playback devices

HDCP 2.2 compliant

  • Adheres to latest specification for High-bandwidth Digital Content Protection
  • Allows protected content stream to pass between devices

Supports 4K HDR10 @ 24 Hz

  • Extends 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)

Remote-powered receiver

  • Industry standard IEEE 802.3af PoE for receiver is supplied by transmitter over HDBaseT
  • Saves time and integration costs

Extended distance HDMI extension

  • Transmits HDMI signals up to 330 ft (100m) @ 1080P with CAT5e/6 or 4K/UHD using CAT6a/7 cable
  • Uses easy-to-integrate category cable for low-cost, reliable system installation

AV, Ethernet, power, and control over HDBaseT

  • Delivers 4K/UHD video, audio, 100Base-T Ethernet, power, and control through a single cable
  • Eliminates multiple cable runs between source, control system, router, and display

Rear panel I/O connectors

  • Placement of ports on rear panel simplifies wire management
  • Saves installation time and eliminates clutter

Multi-channel audio compliant

  • Supports PCM, Dolby Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, DTS:X™
  • Allows any multi-channel audio stream to be used within a professional audio system

Field updatable firmware

  • Front panel USB port provides an easy means for kit upgrades
  • Ensures long term system return on investment

Front panel Power and Link status LEDs

  • LED indicators provide power and HDBaseT link status information
  • Provides easy setup and troubleshooting

Power chaining

  • Included power supply provides ample power for up to three Atlona HDBaseT extenders
  • Four Atlona HDBaseT extenders can be powered using the optional AT-PS-483125-C power supply
  • Reduces clutter from multiple power supplies in equipment racks

Low-profile, 1 inch (2.5 cm) high quarter rack-width enclosure

  • Easy installation into racks and confined spaces behind displays
  • Keeps devices out-of-sight when placed in public spaces

Included accessories

  • User guide, desktop power supply for transmitter, detachable power cable, IR emitter P/N AT-IR-CS-TX, mounting brackets

Product Warranty

Specifications
Video
HDMI 2.0
HDCP 1.4 / 2.2
Video 4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p, 1920x1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1920x1080i@50/59.94/60Hz, 1280x720p@50/59.94/60Hz, 720x576p@50Hz, 720x576i@50Hz, 720x480p@60Hz, 640x480i@60Hz
VESA @ 60Hz 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480
Colorspace YCbCr, RGB
Chroma Subsampling 4:4:4, 4:2:2, 4:2:0
Color Depth 8-bit, 10-bit, 12-bit
HDR 4K HDR10 @ 24Hz, 4:2:0 chroma subsampling, 10-bit color
(Source signal delivered from Ultra HD Blu-ray as 4K @ 24Hz 4:2:2. Not compatible with HDR10 @ 60Hz.)
Audio
Formats PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, Dolby Digital+, Dolby TrueHD, Dolby Atmos, DTS Digital Surround, DTS-HD Master Audio, DTS:X
Sample Rate 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit Rate up to 24-bit
Distance
CAT5e/6 @ 4K up to 70 meters up to 230 feet
CAT6a/7 @ 4K up to 100 meters up to 330 feet
CAT5e/6 @ 1080p up to 100 meters up to 330 feet
HDMI IN/OUT @ 4K up to 5 meters up to 15 feet
HDMI IN/OUT @ 1080p up to 10 meters up to 30 feet
Connectors and Indicators
HDMI IN/OUT (TX/RX) 1 – Type A, 19-pin
HDBaseT OUT/IN (TX/RX) 1 – RJ45 (8P8C)
LAN (RX/TX) 1 – RJ45, 10/100/1000 Mbps
IR IN/OUT (TX) 1 – 4-pin captive screw
IR IN/OUT (RX) 1 – 5-pin captive screw
RS-232 (RX/TX) 1 – 3-pin captive screw
Power (RX/TX) 1 – 2-pin, 48V captive screw
LEDs 1 – PWR, green
1 – LINK, amber
Power
Total Power Consumption 12W
External Power Supply (optional)
AT-PS-483125-C		 Input: 100-220VAC, 50/60Hz
Output: 48V/0.8A DC
Safety CE, FCC, RoHS, cULus, RCM, CCC
Temperature
Operating 0°C to 50°C 32°F to 122°F
Storage -20°C to 60°C -4°F to 140°F
Humidity 20 to 90% non-condensing
Dimensions Inches Millimeters
Unit 0.98 x 4.29 x 3.50 25 x 109 x 89
Unit w/feet/ears 1.06 x 4.69 x 3.50 27 x 119 x 89
Power Supply 1.42 x 1.81 x 4.41 36 x 46 x 112
Chassis
Weight 0.30kg 0.86lbs
Safety CE, FCC

* 4096×2160@50/60Hz & 3840×2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only

Diagrams
Applilcation-Mockups-EX-100CE
Applilcation-Mockups-100CE
Resources

Documentation

pdf-icon Datasheet
pdf-icon Manual

International Documentation

pdf-icon Fiche Produit Francais

Declaration of Conformity

pdf-icon AT-UHD-EX-100CE-KIT
pdf-icon EC AT-UHD-EX-100CE-KIT

CAD File

cad-icon-(1) AT-UHD-EX-100CE-RX
cad-icon-(1) AT-UHD-EX-100CE-TX
Related Products

Related Products

WordPress Tables Plugin

Similar Products

WordPress Tables Plugin
Firmware

AT-UHD-EX-100CE-KIT Firmware

Firmware AT-UHD-EX Valens Firmware Version x.31.31.5
File Size 1.69 MB
Date 10.01.18

Release Notes

Version x.31.31.5

Features

  • Added CRC validity check of firmware images.

Bug Fixes

  • Resolved an issue where video was dropping, momentarily, following a disconnect-reconnect of the source device.
  • Fixed an issue with 720p60 10bpc, using Quantum Data pixel error test results.
  • Improved HDMI performance at low pixel clock speeds (< 100 MHz ).
  • Improved HDMI error filtering.

Sign up for updates

Notify Me!

Related Products