Two-Input Wallplate HDBaseT Extender for HDMI Video

Two-Input Wallplate HDBaseT Extender for HDMI Video

AT-HDVS-210H-TX-WP-KIT

HDBaseT™ extender kit for AV, power, and control up to 330 feet (100 meters)
US one-gang enclosure for wallplate openings – interchangeable black or white trim kits
2×1 HDBaseT switcher with HDMI^® inputs
4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling
Transmitter powered by receiver via HDBaseT
Automatic input selection and automatic display control
Audio de-embedding at receiver

SKU: AT-HDVS-210H-TX-WP-KIT Categories: Ethernet Pass-through, Switchers, Extenders, Control, HDMI, HDVS Series, Active, Wall Plate, Receivers, Transmitters, Kits, HDBaseT, Switcher, Single Output, HDMI to HDMI, HDMI, HDBaseT, HDVS Series, Extender, Wall Plate, Kits Tags: at-hdvs-210h-tx-wp-kit, IR/RS-232, CEC, Kit (TX+RX), Box, Wall Plate, 100 m (330 ft), Multi-input TX, 4K/UHD 10 Gbps, RS-232, HDMI, HDMI only, HDCP 2.2, 2, hdvs-210h-tx-wp-kit, Switchers, Multi-Format Switchers, HDMI/HDMI

Request a Quote

NOTE: The AT-OME-RX11 receiver has replaced the AT-UHD-EX-100CE-RX-PSE in a previous version of this extender kit. It offers the same features, with the addition of audio de-embedding capability.

Two-Input Wallplate HDBaseT Extender for HDMI Video

The Atlona AT-HDVS-210H-TX-WP-KIT is an HDBaseT transmitter and receiver combination that delivers a complete integration solution with 4K video extension, automatic switching for the two HDMI inputs, and automatic display control. It includes the AT-HDVS-210H-TX-WP two-input HDBaseT wallplate switcher and AT-OME-RX11 HDBaseT receiver. The HDVS-210H-TX-WP features a US one-gang, wallplate form factor, and includes interchangeable black and white wallplates and faceplates. The OME-RX11 features a compact, low-profile enclosure that can easily be concealed behind a wall-mounted display or above a projector. This HDBaseT extender solution extends AV and control up to 330 feet (100 meters) over category cable. Audio de–embedding is available at the receiver.

The transmitter is remotely powered by the receiver over HDBaseT. This makes the HDVS-210H-TX-WP-KIT ideal for applications in which the transmitter needs to be installed at a wall location or in a lectern where local AC power may not be available.

Features

US one-gang enclosure for wallplate openings – interchangeable black or white trim kits

Allows inconspicuous installation on a wall, in furniture, or in a floor box
Includes black and white wallplates and faceplates
Ships with white plates installed

2×1 HDBaseT switcher with HDMI inputs

Conveniently accepts two HDMI sources in a single-gang enclosure
Minimizes wall or surface space for a discreet installation

HDBaseT extender for AV, power, and control up to 330 feet (100 meters)

Extends HDMI video up to 330 feet (100 meters) @ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cable*
Uses easy-to-integrate category cable for low-cost, reliable system installation
* To achieve optimal HDBaseT performance, CAT6a or CAT7 shielded twisted pair cable is highly recommended.

4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling

Compatible with sources up to 4K/60 4:2:0 and 4K/30 4:4:4
Supports HDMI data rates up to 10 Gbps from PCs, media players, and Ultra HD Blu-ray players

HDCP 2.2 compliant

Adheres to latest specification for High-bandwidth Digital Content Protection
Allows protected content stream to pass between authenticated devices

Transmitter powered by receiver over HDBaseT

Industry standard IEEE 802.3af PoE is supplied by the receiver over HDBaseT
Allows convenient wall, floor box, or furniture installation without the need for local AC power

Automatic display control

Automatically changes display power state based on active or standby mode of the switcher. Control signals to display are transmitted via IP, RS-232, or CEC.
Enables display and volume control. CEC enables control of consumer displays (as supported by the display manufacturer).
Includes an adjustable lamp cooldown mode to avoid prematurely powering up a projector after shutdown
Eliminates the need for a complex AV control system

Automatic input selection using hot plug detect and video detection technology

Selects active input when sources are connected or if there is a change in source power status
Enables simplified, automatic system operation without user intervention

Audio de–embedding at receiver

De-embeds two channel PCM audio to a balanced, analog audio output
Deliver audio to an amplifier and speakers for sound reinforcement

Multi-channel audio compliant

Passes through multi-channel audio formats from the HDMI inputs
Supports PCM, Dolby^® Digital, Dolby Digital Plus™, Dolby TrueHD, DTS^® Digital Surround™, and DTS-HD Master Audio™

EDID management

Manages EDID communications with the source through a display’s EDID or internally stored EDID
Ensures desired audio formats and video resolutions are provided to the AV system

HDCP management

Automatically reports HDCP compliance status to the source based on the sink device
HDCP compliance can also be disengaged through AMS or a control system
Allows non-protected material from PCs to pass to non-compliant displays, streaming devices, and teleconference systems; protected content is not transmitted

Integrated HDBaseT link status monitoring

Tests integrity of the HDBaseT cable link between the transmitter and the receiver
Web GUI provides real-time link status
Quick, easy verification or troubleshooting of RJ-45 termination or twisted pair cable quality

Intuitive GUI-based configuration using integrated web server (transmitter)

Offers menu-based configuration of device settings including network access, input switching, display control, HDCP and EDID management, and more
Allows fast configuration of internal product settings and troubleshooting from a mobile device or PC in the field

TCP/IP and RS-232 control (transmitter)

Flexible control options for compatibility with Atlona Velocity™ and third-party control systems
TCP/IP control available through the receiver
Reduces integration time and costs

Easy to configure and manage with Velocity Device Manager – transmitter

Centralized, network-based configuration and management of Atlona IP-controllable products and systems
Manage configuration and firmware updates for AV devices spanning a facility, building, enterprise, or residence
Available as a free software download, or in complete Velocity control system components

Field-updatable firmware

Transmitter can be updated in the field via AMS or the web GUI
USB port on transmitter and receiver for firmware updates

Front panel power and signal status LEDs

LED indicators provide power, HDBaseT link, and input selection status information
Provides local, convenient setup and troubleshooting when network access is not available

Low-profile, 1 inch (25 mm) high quarter rack-width enclosure (receiver)

Easy installation into confined spaces behind displays and above projectors
Keeps devices out-of-sight when placed in public spaces

Included accessories

Installation guide
Interchangeable black and white wallplates and faceplates
Surface mounting hardware
External universal power supply

Product Warranty

To view the product warranty, use the following link: https://atlona.com/warranty/

Specifications

NOTE: The AT-OME-RX11 receiver has replaced the AT-UHD-EX-100CE-RX-PSE in a previous version of this extender kit. It offers the same features, with the addition of audio de-embedding capability.

Specifications are provided below for both receivers.

Specifications for AT-HDVS-210H-TX-WP

Jump to: Specifications for AT-OME-RX11

Jump to: Specifications for AT-UHD-EX-100CE-RX-PSE

Video
UHD/HD/SD	4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/ 29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i
VESA	2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480
Color Space	YUV, RGB
Chroma Subsampling	4:4:4, 4:2:2, 4:2:0
Color Depth	8-bit, 10-bit, 12-bit

Audio
HDMI In / HDBaseT Out	PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS® 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio™
Sample Rate	32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit Rate	up to 24-bit

Resolution / Distance
CAT5e/6 @ 4K	up to 70 meters	up to 230 feet
CAT5e/6 @ 1080p	up to 100 meters	up to 330 feet
CAT6a/7 @ 4K	up to 100 meters	up to 330 feet
HDMI IN/OUT @ 4K	up to 5 meters	up to 15 feet
HDMI IN/OUT @ 1080p	up to 10 meters	up to 30 feet

Signal
Bandwidth	10.2 Gbps
CEC	Yes
HDCP	2.2

Temperature
Operating	0°C to 40°C	32°F to 104°F
Storage	-20°C to 60°C	-4°F to 140°F
Humidity (RH)	20 to 90%, non-condensing

Power
Consumption	0.61 A (low)	1.05 A (full)

Dimensions
Wall	1 gang, 59.5 mm (2.35 in) deep

Weight
Device	0.18 kg	0.40 lbs

Certification
Device	CE, FCC

* 4096×2160@50/60Hz & 3840×2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only

Specifications for AT-OME-RX11

Jump to: Specifications for AT-HDVS-210H-TX-WP

Jump to: Specifications for AT-UHD-EX-100CE-RX-PSE

Video
HDMI	2.0
HDCP	2.2
UHD/HD/SD	4096×2160@60/50/30/25/24Hz 3840×2160@60/50/30/25/24Hz 1080p@60/59.9/50/30/29.97/25/24/23.98Hz 1080i@30/29.97/25Hz 720p@60/59.94/50Hz	576p@50Hz 576i@25Hz 480p@60/59.96Hz 480i@30Hz
VESA	2560×1600 2048×1536 1920×1200 1680×1050 1600×1200 1440×900 1400×1050 1280×1024	1280×800 1366×768 1360×768 1152×864 1024×768 800×600 640×480
Color Space	YUV, RGB
Chroma Subsampling	4:4:4, 4:2:2, 4:2:0
Color Depth	8-bit, 10-bit, 12-bit

Audio
HDMI Pass-Through Formats	PCM 2.0 LPCM 5.1 LPCM 7.1	Dolby® Digital Dolby Digital Plus™ Dolby TrueHD Dolby Atmos®	DTS® Digital Surround™ DTS-HD Master Audio™ DTS:X®
Bit Rate	24 Mbits/s max
Analog Audio
Format	Stereo 2-Channel
Output level	L: 5.883 Vrms R: 5.855 Vrms
Frequency Response	20 Hz to 20 kHz
THD+N	< 0.00009% at 20 Hz to 20 kHz
SNR	> 141.49 dB at 1 kHz
Sample Rate	32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz

Control
RS-232	2-way device control and monitoring Supported baud rates: 2400, 4800, 9600, 19200, 38400, 57600, 115200
CEC Support	Yes

Resolution / Distance	4K/UHD – Feet / Meters		1080p – Feet / Meters
HDMI IN/OUT	15	5	30	10
CAT5e	295	90	330	100
CAT6/6a/7	330	100	330	100

Connectors, Controls, and Indicators
HDBaseT IN	1 – RJ45, female
HDMI OUT	1 – Type A, 19-pin female
AUDIO OUT	1 – 5-pin captive screw, balanced / unbalanced 2-channel
RS-232	1 – 3-pin captive screw (bidirectional)
LAN	1 – RJ45, 100Base-T
FW	1 – Mini-USB, 5-pin female
DC 24V	1 – 4-pin, mini-DIN locking connector
PWR indicator	1 – LED, green
LINK indicator	1 – LED, yellow

Temperature	Fahrenheit	Celsius
Operating	32 to 122	0 to 50
Storage	-4 to 140	-20 to 60
Humidity (RH)	20% to 60%, non-condensing

Power
Consumption	15.12 W
Supply	Input: 100 – 240 VAC, 50/60 Hz Output: DC 24 V / 2.7 A

Dimensions (H x W x D)	Inches	Millimeters
Unit	1.02 x 4.29 x 5.24	26 x 109 x 133
Power Supply	1.26 x 1.93 x 4.69	32 x 49 x 119

Weight	Pounds	Kilograms
Device	0.90	0.41

Certification
Device	CE, FCC
Supply	CE, FCC, UL

Specifications for AT-UHD-EX-100CE-RX-PSE

Jump to: Specifications for AT-HDVS-210H-TX-WP

Jump to: Specifications for AT-OME-RX11

Resolution
Video	4096×2160@24/25/30/50/60Hz, 3840×2160@24/25/30/50/60Hz, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i
VESA	2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480
Colorspace	YCbCr, RGB
Chroma Subsampling	4:4:4, 4:2:2, 4:2:0
Color Depth	8-bit, 10-bit, 12-bit
HDR	4K HDR10 @ 24Hz, 4:2:0 chroma subsampling, 10-bit color (Source signal delivered from Ultra HD Blu-ray as 4K @ 24Hz 4:2:2. Not compatible with HDR10 @ 60Hz.)

Audio
Formats	PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
Sample Rate	32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit Rate	up to 24-bit

Distance
CAT5e/6 @ 4K	up to 70 meters	up to 230 feet
CAT6a/7 @ 4K	up to 100 meters	up to 328 feet
CAT5e/6 @ 1080p	up to 100 meters	up to 328 feet
HDMI IN/OUT @ 4K	up to 5 meters	up to 15 feet
HDMI IN/OUT @ 1080p	up to 10 meters	up to 30 feet

Signal
Bandwidth	10.2 Gbps
CEC	Pass through
HDCP	Supports up to 2.2

Temperature
Operating	0°C to 50°C	32°F to 122°F
Storage	-20°C to 60°C	-4°F to 140°F
Humidity	20 to 90% non-condensing

Power
Consumption	15.2W (when paired with TX)
Supply	Input: AC100~240V 50/60Hz Output: DC 48V/0.83A

Dimensions	Inches	Millimeters
Unit	0.98 x 4.29 x 5	25 x 109 x 127
Unit w/feet/ears	1.06 x 4.69 x 5	27 x 119 x 127
Power Supply	1.42 x 1.81 x 4.41	36 x 46 x 112

Weight
Unit	0.39kg	0.86lbs

Certification
Power Supply	CE, FCC, RoHS, cULus, RCM, CCC
Product	CE, FCC

* 4096×2160@50/60Hz & 3840×2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only

Diagrams

Wallplate extender for two HDMI sources

The AT-HDVS-210H-TX-WP-KIT delivers a complete integration solution with 4K video extension, automatic switching for the two HDMI inputs, audio de-embedding, and automatic display control.

The wallplate transmitter is remotely powered by the receiver over HDBaseT.

Resources

NOTE: The AT-OME-RX11 receiver has replaced the AT-UHD-EX-100CE-RX-PSE in a previous version of this extender kit. It offers the same features, with the addition of audio de-embedding capability.

Documentation

	Datasheet (AT-HDVS-210H-TX-WP)
	Datasheet (AT-OME-RX11)
	Datasheet (AT-UHD-EX-100CE-RX-PSE)
	Installation Guide (AT-HDVS-210H-TX-WP)
	Guía de instalación (AT-HDVS-210H-TX-WP)
	Installation Guide (AT-OME-RX11)
	Manual (AT-HDVS-210H-TX-WP)
	Manual (AT-UHD-EX-100CE-RX-PSE)
	API (AT-HDVS-210H-TX-WP)

Declarations of Conformity

	AT-HDVS-210H-TX-WP
	EC AT-HDVS-210H-TX-WP
	UK AT-HDVS-210H-TX-WP
	AT-OME-RX11
	CE AT-OME-RX11
	UK AT-OME-RX11
	AT-UHD-EX-100CE-RX-PSE

Letter of Volatility

AT-OME-RX11

CAD Files

	AT-HDVS-210H-TX-WP
	AT-OME-RX11 (dwg)
	AT-OME-RX11 (pdf)
	AT-UHD-EX-100CE-RX-PSE

Support

Product Engineering Document

Related Products

Product	Description
AT-LC-UC2UC-2M	LinkConnect USB-C to USB-C Cable
LC-H2H	LinkConnect HDMI to HDMI Cable
LC-MDP2H	LinkConnect Mini DisplayPort to HDMI Cable

Similar Products

Product	Description
AT-HDVS-210H-TX-WP	Two-Input Wallplate HDBaseT Transmitter for HDMI
AT-OME-EX-KIT	HDMI Over HDBaseT TX/RX with USB, Control, and PoE
AT-OME-EX-KIT-LT	HDMI Over HDBaseT TX/RX with USB, Control, and PoE
AT-OME-EX-WP-KIT	Wallplate HDBaseT TX/RX for HDMI with USB, Control, and PoE

AT-HDVS-210H-TX-WP-KIT Firmware

NOTE: The AT-OME-RX11 receiver has replaced the AT-UHD-EX-100CE-RX-PSE in a previous version of this extender kit.

The AT-UHD-EX firmware is specific to the AT-UHD-EX-100CE-RX-PSE.

Firmware	AT-HDVS-210H-TX-WP Firmware Version 1.0.38
File Size	902 KB
Date	12.04.19

Firmware	AT-UHD-EX Valens Firmware Version x.31.31.5
File Size	1.69 MB
Date	10.01.18

Version 1.0.38

Features

Added display control support when connected to the AT-UHD-CLSO-824.

Bug Fixes

The front-panel LED indicators now flash the correct number of times to properly indicate the selected IP mode.
Fixed an issue where, when connected to the AT-HDVS-200-RX, display control commands would not be passed to the display.
Fixed an issue where, when connected to the AT-OME-RX21, display control programming is now performed from the AT-OME-RX21.

Previous Releases

Version 1.0.21

Features

Added support for hostname identification.
Added help tips on EDID and Display Web UI pages.

Bug Fixes

Resolved an issue where credentials were incorrectly being validated on the login page.
Resolved an issue with RS232 zone settings not being retained after a loss of power.
Resolved an issue where the default IP address in the Display page of the Web UI would default to 255.255.255.0.
Resolved an issue where using the “sta” argument with the “System” command would return an invalid MAC address.

Version 1.0.21

Compatibility update for AT-HDVS-200-RX, AT-UHD-CLSO-612ED, and AT-HDVS-SC-RX.

Version 1.0.17

Bug Fixes

Update to the built-in web interface.
Improved Telnet login handling when invalid credentials are provided.

Version 1.0.13

Bug Fixes

Fixed an issue where the serial baud rate of 56000 was invalid.
Fixed an issue where performing a factory reset, using the button under the faceplate, the serial baud rate was not set to the default setting of 115200.
Improved reporting on Video Info page, in the webGUI.
Improved system stability.

Version 1.0.10

Features

Added new commands:

InputStatus – This command provides the current status of the HDMI inputs. Return values are: 0 = no source present, 1 = source present. The status of an individual input can be returned by using the input number as an argument.
InputBroadcast – Enabling this feature, using the on argument, will return the input status on all HDMI inputs. The default setting is on.

Added General tab which reports the following devices: AT-HDVS-200-RX, AT-UHD-SW-5000ED, AT-UHD-CLSO-612ED, and AT-UHD-CLSO-824.

Bug Fixes

Fixed an issue where the VIC in the EDID video data block was repeated for EDID 12 (3840×2160@30 2CH) and EDID 13 (3840×2160@30 MCH).
Resolved an issue where the Samsung K8500 source would not pass the A/V signal when connected to a 6G display.
Fixed an issue where if a PC monitor (e.g. ASUS PB287Q) was placed in sleep mode, when connected to an HDCP source through an extender kit, would diminish the A/V signal at the sink device.
Fixed an issue where auto-switching did not function correctly when quickly disconnecting and reconnecting an input.

Version 1

Factory firmware

Version x.31.31.5

Features

Added CRC validity check of firmware images.

Bug Fixes

Resolved an issue where video was dropping, momentarily, following a disconnect-reconnect of the source device.
Fixed an issue with 720p60 10bpc, using Quantum Data pixel error test results.
Improved HDMI performance at low pixel clock speeds (< 100 MHz ).
Improved HDMI error filtering.

Sign up for updates

Notify Me!

Overview

NOTE: The AT-OME-RX11 receiver has replaced the AT-UHD-EX-100CE-RX-PSE in a previous version of this extender kit. It offers the same features, with the addition of audio de-embedding capability.