Features

• New driver:
• AT-PRO5-MX810, AT-PRO5-101-RX, and AT-PRO5-101-SC-RX
• AT-USB-EX350
• Audio Technica devices: ATDM-0604A, ATDM-1012DAN, and ATND1061DAN

Function Changes

• Macro command Sync is now renamed Sequential.

Bug Fixes

• VCC-RELAY sensor triggers now work when using TCP mode.
• VTPG, VTP-1000, and VTP-700 LEDs now stay on when set by macros.
• Sliders no longer send extra values when adjusting.
• Mute and Unmute event macros are now sending the correct toggle values.

Features

• New driver:
• MaxHub MTR
• MaxHub CMA series 4K displays
• NETIO
• Http Bose Professional Video Bar
• Driver updates:
  • Aux and Mixer sliders added to AT-OME-PS62.
  • MDNS discovery added to AT-OME-SW21-TX-WPC.
• OMNI-311 and OMNI-324 USB Manager added.

Function Changes

• Default and Custom User Interface now have a navigation button for Yealink MTR.
• Enter and additional spaces now able to be used in CUI labels.

Bug Fixes

• Velocity no longer restarts when an RS-232 connection is made.
• VTP-700 now displays the Fusion Ovation Music Server correctly.
• VTPs no longer restart every 5 minutes when redundancy is set up.
• Audio slider volume up and down now work as intended.
• Error message now displays correctly when an invalid passcode is entered.
• Room passcodes now work.
• Input variables now update correctly with changes on AT-OME-CS31-SA and SA-C.
• Volume up and volume down commands now send properly to BenQ Projectors.

Features

• N/A

Function Changes

• N/A

Bug Fixes

• Widgets now appear correctly on the Dashboard.
• Subscription is no longer rejected when using the Biamp driver.

Features

• N/A

Function Changes

• AT-GAIN-M50 driver functionality updated

Bug Fixes

• N/A

Features

• N/A

Function Changes

• N/A

Bug Fixes

• Password update for mass credentials on VDM now sends correctly for the ANC-108D.
• Commands are now sent correctly to the VCC-RS232.
• HDMI output page now updates with the scrambling key in OmniStream’s video wall mode.

Features

• New driver:
• AT-GAIN-M50
• Monitors AnyWhere (MAWi)
• Driver updates:
  • Two-way communication added to AHM-XX.
  • Set Relay Type macro added to VCC-RELAY.
  • Multiple meetings can now be set for a single event on Ad-Astra Scheduling.
• Sorting and Paging added to Virtual Matrix.
• Power management added for VTPG-1000VL to enable and disable low battery notifications.
• CUI timers can now be started simultaneously.
• Custom UI Labels can now pull custom data from hosted CSV files.

Function Changes

• Updated the EDID commands of AT-OME-MH21/-CP.

Bug Fixes

• VCC Updates:
• Power Cycle no longer removes Relay settings.
• Relay now reconfigured correctly on reconnection.
• Idle navigate to page now functions as intended.
• Panels no longer randomly restart when using redundancy.
• More than six macros can be run simultaneously at a time.
• Device variables now working with multiple octets.

Features

• New driver:
• Rauland Telecenter Communication System
• Driver updates:
• AT-OME-MH21/-CP added +5V HDMI Output on/auto toggle.

Function Changes

• N/A

Bug Fixes

• Input 6 now shows as an input mute option macro in the Audio Technica ATDM-0604 digital smart mixer driver.
• Passcode enabling for revert settings now works as intended.
• Default UI now has CEC selectable.
• VKP macros in API mode now function correctly after changing icons.
• The CEC mute macro parameters for AT-OME-MH21/-CP now appear correctly.

Features

• New driver:
• AT-OME-MS42-HDBT
• Driver updates:
• Discovery protocol added for: AT-OME-CS31-SA, AT-OME-CS31-SA-HDBT, and AT-OME-CS31-SA-C
• Cable status and resolutions added for macros & variables options of the WAVE-101
• Two-way feedback added for AHM
• Custom UI now has an undo feature.
• Styling added to the Custom UI Time widget.
• Images can now be cleared from within styles.
• Tools now has the option to clear orphan variables.
• Restart Machine added to macro commands to allow a reboot of Velocity.

Function Changes

• Style options have been updated for ease of use.
• Rooms may no longer be copied or exported through the VTPG panel card.

Bug Fixes

• Image upload through the Style section of the Custom UI now works as intended.
• Background preview now displays correctly when changing page or resolution.
• Copy room within custom UI now works correctly.
• Event macros are no longer deleted when split rooms is enabled or disabled.
• Updated Velocity user permissions error message.
• Calender meetings are no longer duplicated in Ad Astra.
• Ovation Duet commands now work as intended.
• Security fixes for the Birthday attacks against TLS ciphers with 64bit block size vulnerability (Sweet32).

Features

• N/A

Function Changes

• N/A

Bug Fixes

• Manual button resizing within CustomUI now works as intended.
• Images that are dragged and dropped into Velocity now show up correctly.

Features

• New driver:
• AT-VTP-700VL-BL
• Driver updates:
  • VKP-8E now has RS-232 API support
  • Now supports mute toggle for AT-OME-CS31
• On Hold Release Macro added to CustomUI.
• Macro added for Velocity gateway reboot.

Function Changes

• Velocity Device Manager now efficiently loads large systems.
• Now tracks Room on/off for AT-OCS-900N.
• AT-OCS-900N configuration reconfigured to be user friendly.
• Redundancy work flow and settings reworked for usability.

Bug Fixes

• Volume control for the AT-OME-CS31 now works as intended.
• CustomUI background gradient now displays correctly.
• Numeric passcode locking now works as intended.
• Browser and device editor back buttons now work.
• Deleting default remote buttons is now easier.
• Variable page loads quicker.
• OmniStream devices memory issue resolved.
• Symetrix driver now macros updated to text values.
• Touch panel home page music icon now works as intended.

Features

• New driver and driver features added:
• AT-OME-CS31-SA and AT-OME-CS31-SA-HDBT
• Driver updates:
• Fusion Research Ovation Music Server: Now supports playlist functionality

Function Changes

• Confirmation pop up now appears when adding multi-button panel widgets to CUI.

Bug Fixes

• Refreshing and resizing Virtual panel and iPad custom UIs no longer cause errant macros to trigger.
• Virtual Matrix now works as intended.

Features

• New driver and driver features added:
• AT-VKP-8E and AT-VKP-8E-EU
• Driver updates:
• AT-WAVE-101: Shutdown command added.
• AT-OME-SW32: Display button commands added.
• Ad Astra scheduling now supports SSO account authentication.
• Device manager now loads 50 devices per page.

Function Changes

• Icon Selection is now a popup window.
• Recently Used option added to icon groups.

Bug Fixes

• Meeting end times now correctly update to Outlook when the stop button is used from the meeting panel.
• RS-232 TCP proxy commands now work correctly.
• AT-VTPG-1000VL no longer shows connection warning when actively connected.
• Custom UI hidden buttons now work correctly with button conditions.
• Variable parsing of room triggers now work correctly.
• Display ordering now works as intended.
• Gain level functionality updated for LEA AMP drivers.
• Ubuntu 20.04.6 update now shows the correct disk usage percentage.
• Ubuntu update patches now install correctly on AT-VTPG-1000.

Features

• New driver and driver features added:
• AT-HDR-SW-51, AT-HDR-SW-52, AT-HDR-SW-52ED
• Microsoft 365 Government Community Cloud High

Function Changes

• Added panel queuing to provide better performance in large systems.

Bug Fixes

• Header button and title settings now work correctly.
• AT-OME-MS52W and AT-UHD-SW-510W variable volume level now works as intended.
• AT-OME-MH21 and AT-OME-MH21-CP variable input status now works as intended.

Features

• New driver and driver features added:
• Allen and Heath AHM Series
• Added ‘Keep Alive’ support to PJ Link driver.

Function Changes

• Velocity Device Manager now shows 50 devices per screen and has a page selector to go between pages when there are more than 50 devices.
• Video Wall sources are now sorted in ascending order.
• Driver commands are now timed for better compatibility.
• VTP synchronization is now done through Velocity by assigning IP address within the Edit Room Technology page.
• Anonymous Room Control Access is now accessed through the Security page instead of Edit Room Technology.
• Updated the IP and URL for Yealink integration.
• Simplified the Touch Panel QR code access setup.

Bug Fixes

• Audio sliders now work as intended.
• VTPG-1000VL static IP address settings now apply correctly.

Features

• New driver and driver features added:
• Yealink MVC Series MTRs
• Yamaha RM-CR DSP

Function Changes

• Gateway model number is now displayed in the Help menu.
• Velocity Device Manager now loads device data fields more efficiently.

Bug Fixes

• Labels for the Macro buttons now appear correctly.
• Audio now routes correctly when Split Room mode is activated.
• Warning state (15 minute notice screen) now works correctly on the scheduling panel.
• Redundancy now correctly writes settings to the secondary unit and locks the fields so they can no longer be edited.
• Error message no longer appears when Macros are successfully deleted.
• Velocity Virtual machine redundancy now works correctly.
• Biamp Tesira passwords now work as intended.

Features

• New driver and driver features added:
• AT-HDR-CAT-2
• AT-HDR-CAT-4
• AT-HDR-CAT-4ED
• AT-HDR-CAT-8
• AT-OME-MH21-CP
• AT-CAP-FC110
• Xilica Solaro QR1 controls updated
• Fusion CS-200
• HMS Networks Intesis BACNet Interface
• 1Beyond Automate VX
• Aver PTZ330N
• OmniStream 2.0 now supported:
• Multiview macro support added.
• IP Input Range can now be enabled through a macro command.
• Audio/Video input can now be set by macro command on the decoder.
• Video thumbnails of content will now display on the touch panel.
• Ethernet link test now included on the encoder’s Session tab in Velocity Device Manager.
• A warning is now displayed when there is a codec mismatch.
• Debug option added.
• Custom UI now supports dyamic images.
• AT-VTP-1000VL can now be updated through Velocity Device Manager.

Function Changes

• Random multicast assignment option removed from the multicast tab in the network settings.
• AMS has been updated to Device Manager to match new sku of AT-VDM-SW.
• Save buttons within the Room Technology page are now located at the top right corner in the static header.
• Virtual Matrix supported only when OmniStream IP input is set to Default UI mode.
• Amino driver updated.
• AT-ANC-108D updated to support AT-OME-MH21-CP

Bug Fixes

• AT-VTPG-1000VL DNS settings now function as intended.
• Touch panels now display DSP dialers correctly.
• Security page now loads the certificate information.
• Updating Static IP address and custom DNS settings now works on Velocity VMs and AT-VTPG-1000VL.
• Videowall presets and zone buttons aligment fixed.
• Custom UI room images now display correctly.
• Floors now copy correctly.

Features

• N/A

Function Changes

• Removed firmware notification icon from the header, the Check For Updates button on the Gateway page is now the only way to verify the current firmware within Velocity.

Bug Fixes

• Video Wall Edit Page now correctly opens.
• Gridlines on the Custom UI page now align.
• Cisco Telepresence and CE edit page now opens as intended.
• Background image remove button is now back on the Custom UI page.

Features

• The gateway now provides a Bill of Materials under reports.
• VTPG-1000VL Updates:
  • LEDs now operate via macros in the control mode.
  • The unit can now be factory reset and rebooted through the on-screen panel menu.
  • The security PIN can now but updated through the security settings.
• VTP and VSP 800 panels can now be set between Landscape and Portrait mode.
• Updated the OME-PS62 driver for control through port 9004.
• Casting status variable added to the AT-WAVE-101 driver.
• Control pages with multiple remotes now load faster.

Function Changes

• VTPG-1000VL Updates:
  • Additional control rooms can no longer be added to the panel.
  • Zoom by pinching is no longer available to prevent scaling issues.
  • QR code is now operable when using Local LAN access.
• All Devices and All Macros is now accessible through the Reports option in the main menu.

Bug Fixes

• AMS now properly sets the device subnet information.
• Identify button in the modify room page for the VTPG-1000VL now works as intended.
• Custom UI auto text position, location, and sizes now display correctly.
• Updated labels will now display correctly when selecting another item inside the custom UI.
• USB-C input feedback for the AT-OME-ST31A no longer repeats.
• Velocity software pages now scroll as intended on mobile phones.

Features

• Added compatibility to Velocity Premier Services (AT-VPS-RG) for Remote Gateway services and cloud backups.
• Support tickets now display the gateway name for easier troubleshooting.
• Added global QR code security options.
• Zoom UI now displays in standard format across all panels excluding AT-VTP-550.
• Percentage and dB labels can now be hidden on sliders.

Function Changes

• An internet connection is now required for the initial setup of cloud-based scheduling.
• Room Support Summary and Meeting Schedule Summary are now hidden by default on the home page dashboard.

Bug Fixes

• The navigate to control button no longer goes missing, when navigating a panel between control and scheduling by macro.
• Button Click macros now function correctly.
• Navigating to another page no longer causes Text Variables to appear incorrectly.
• Database deletion and the keyboard now work correctly on the AT-VTPG-1000VL.
• Icon sizing and spacing now appears correctly on the default UI.
• DSP mute alignment now displays correctly.
• Conditions now scroll correctly.
• Two-way parsing now works as intended.

Features

• Touch panels can now be unsynced from the room and resynced by IP address.

Bug Fixes

• AT-VTPG-1000VL’s LEDs now function when synced as a scheduling panel.
• Home screen buttons no longer send commands multiple times.
• Text fields within the Custom UI now work as designed.
• Video Wall configuration UI now appears correctly.
• Legacy room graphics now appear correctly on the AT-VTP-800.
• WebSocket drivers now work as intended.
• Network Settings page now displays Network 1 and 2 properly.

Features

• New driver and driver features added:
  • KMTronic UD2CRB
• Touch panels can now be duplicated.
• Device drivers can now be sorted by control type.
• Dashboard now displays the gateway’s memory, disk, and CPU usage.
• Increased control functionality of AT-WAVE-101 within AMS.
• The gateway can now send test emails in real time.
• A macro can now be created to refresh the iframes of the custom UI.
• Ubuntu versions and patches can now be updated on the AT-VGW-SW and AT-VGW-HW.
• When a touch panel is refreshed, it now returns to the same page instead of home.
• Room names can now be enabled and disabled on scheduling panels.
• Zoom Room SSH Updates:
  • Device variables now indicate which tab the Zoom Room interface is on.
  • Added start, stop, and share content macro commands.
• OmniStream Alarms are now named Notifications.
• Google G-Suite updated to Google Workspace.

Bug Fixes

• Improved scheduling error messages.
• German language translation updated.
• Updated AT-UHD-SW-510W functionality.
• Updated AT-HDVS-CAM driver to display correct names and correctly change power states.
• Percentages now display correctly on custom UI sliders.
• Decimal to Hex translations now work correctly in equipment drivers.
• Wave no longer uses more CPU power than needed.
• TCP mode now triggers the AT-VCC-RELAY sensor correctly.
• Scheduling usernames and passwords now update correctly.
• The 24 hour clock now displays correctly on the custom UI.
• The panel menu now opens correctly on the AT-VTPG-1000VL.
• Device variables now copy correctly.
• The correct MAC address now displays for the AT-UHD-SW51.
• Password change prompt now works correctly.
• Spanish and Hebrew language conditions now display correctly.

Features

• New driver and driver features added:
  • AT-OCS-900N
• Copy Macro now copies all functions of the selected macros.
• Added a generic panel widget for lighting control.
• Fusion Solo and Duet drivers updated for increased compatibility.
• Samsung BET-H driver updated for increased compatibility.

Bug Fixes

• Home page navigation buttons now function as intended.
• Master panel can now navigate between room control UIs correctly.
• Custom UI alignment now updates in real time on the Custom UI design tool.
• Page navigation now works as intended on the VTPs.
• Room title and header icons now hide and show properly.
• Restarting Velocity no longer causes variable default values to appear incorrectly.
• Touch panel LEDs now correctly switch between control and scheduling settings.
• Updating no longer causes the Wake on LAN commands to malfunction.
• Updated Zoom Integration:
  • Sources now select properly.
  • Call accept/reject no longer remains after selection on other panels.
  • Presentation button now functions correctly.
  • Switching devices with Source Select no longer stops sharing.

Features

• New driver and driver features added:
  • TOA A-9120SM2 CU
• Increased control page rendering on graphic intense custom UIs.
• Increase functionality of the Fusion Duet Driver.

Bug Fixes

• Master volume will now mute correctly when selected.
• AT-VTP-1000VLs no longer disappear from the Edit Room Technology page.
• 24-hour time format now displays correctly on scheduling panels.

Features

• New driver and driver features added:
  • Fusion Research Duet
• NTLM authentication now supported for Microsoft Exchange Server.

Bug Fixes

• Updated the JUNO-451 driver.
• Navigate Previous now works correctly within the Custom UI.
• Custom UI sliders updated:
  • DSP sliders now work correctly.
  • Control link now works as intended.
  • Variable sliders set to float now ramp up by the correct increment.
  • Sliders no longer render incorrectly.

Features

• New driver and driver features added:
  • Inogeni Share2U
  • Audio Technica ATDM-0604
• Microsoft Office 365 OAuth scheduling integration now supported.
• Firmware status updates can now be cleared.
• Updated OmniStream driver for added abilities and easier integration:
  • SSL certificates can now be uploaded to OmniStream devices via AMS.
  • Updating device names through AMS now works with the current firmware.
  • Telnet, HTTP, and HTTPS can now be enabled/disabled through AMS.
• Dual NICs now supported by Wake on LAN function within the VGWs.
• Custom UI design tools can now be scaled by percentages.
• Gateway 8.8.8.8 pings can now be disabled.
• Increased customization options for custom UI sliders.

Bug Fixes

• Velocity Touch Panels now display connection status correctly.
• Increased level control compatibility with OME-MS52W.
• Multiple touch panels in the same room no longer cause page navigational errors.
• Velocity touch panel pages now display properly when mirroring is enabled.
• Custom UI fixes:
  • Zoom in and out, now zooms in on the correct area.
  • UI header now appears correctly.
  • Background color now displays as intended.
  • Button multi-select and moving improved.
  • Enabling passcodes now works correctly.

Features

• New driver and driver features added:
  • Samsung BET Displays
• Now provides detailed download and error messages through AMS for the Velocity Touch Panels.
• Room Support ticket chats can now be cleared.

Bug Fixes

• System Variables are now found within the Global Variables.
• Resolved a javascript render error.
• Telnet API was added back into device drivers.
• Custom UI no longer has load errors.
• Custom background colors in CUI now render correctly.

Features

• New driver and driver features added:
  • AT-WAVE-101
  • Sennheiser TCC2
  • Yamaha MTX-3
  • nLight nIO-x
  • Dalite Electrol Screen
• Added Velocity Room Support help desk
  • Room Support widget added to dashboard
• Added CUI panel widgets:
  • Transport
  • Camera
  • Dialer
• User interface can now be switched between control and scheduling.
• Added the ability to control devices in other rooms using macros.
• Now reboots for OmniStream prior to updating firmware.
• Header button option added for the custom UI.
• Enhanced the Zoom contact search.
• Added power control to AT-GAIN-60 and AT-GAIN-120.
• Variables can now be copied to another variable using a macro command.
• Velocity can now send email notifications when Atlona devices have firmware updates available.
• Multiple and divide options added to variables.
• AT-OPUS-RX41 now configurable through AMS.

Bug Fixes

• Updated KNX driver.
• Improved operation with data when scanning in AMS.
• OmniStream Decoders now properly send TCPProxy Commands via RS232 outputs to Displays.
• Background opacity no longer makes all UI transparent to the hidden white background layer.
• The cURL is now correctly installed in firmware.
• Legacy Rooms updated to 2.3.x will now show buttons on the custom pages.
• CUI background colors now update properly.
• CUI Legacy Rooms now load Custom Pages and Buttons without having to update resolution.
• Omega TCP Proxy port on are now modifiable.
• Enable Macro Buttons list now visible when selected.
• UI icons no longer overlap when using Safari.
• Added the ability to delete all variables.
• IP addresses now display correctly.
• Volume Slider no longer disappears when Zoom Room audio output is changed.
• Rooms can no longer be saved without a name.
• Room QR code was now displays after enabling a passcode.
• Mute icon now correctly displays on iPads.

Features

• Added AMS configuration to the AT-OME-SW21-TX-WP driver.
• NTP server can now be configured for use with the Velocity touch panels
• Firmware update progress status now displays when updating Atlona devices through Velocity w/Integrated AMS.
• Velocity touch panels can now be updated through the AMS section within Velocity.
  • Every touch panels with internet can updated all at once with the bulk firmware update.
  • Each touch panel without internet can be locally updated one at a time through AMS.

Bug Fixes

• Slide out drawers now overlay the control pages.
• Velocity no longer displays a server error after firmware update when no time zone is selected.

Features

• New driver and driver features added:
  • AT-OME-SW21-TX-WPC
  • Xilica QR1 DSP
  • Biamp Devio

Bug Fixes

• Header icons and master slider are no longer shifted when drawers are open on the control page.
• Time zones now update times correctly.
• Checksum now calculates correctly on the Samsung multi-display driver.

Features

• Ad Astra calendar scheduling is now supported.
• New driver and driver features added:
  • Fusion Research Ovation Music Server
  • Extron SW4
• Custom UI updates:
  • Added the ability to align multiple controls to each other.
  • Control placement can now be adjusted using the arrow keys.
  • Using shift with the arrow keys can now move controls in larger movements.

Bug Fixes

• Browser control pages no longer lock when launching another anonymous control browser.
• Event macro “Variable Updated” now correctly works with command strings.
• Ending a zoom call no longer randomly selects a room on the Meet Now Page.
• OME-RX31 input switch macro command now works correctly when selected.
• Zoom Room UI now aligns correctly when using an iPad.
• Scheduling panels no longer create an error pop message when synced to Velocity.

Features

• New driver and driver features added:
  • AT-OPUS-RX41
  • Lutron Grafik Eye QSC-CI-NWK-E
  • Lumens DC193 Document Camera
  • BenQ RP6501K, RP7501K, RP8601K for IP/RS-232
  • Avacor F-series display
  • Sony USB-X700 Blu-ray
  • VU PlusZero 4K
  • Yamaha CX-A5200
  • Planar VC4H-BP+
  • Apart Zone4
  • Neets PHTG DSP
  • Sony VPL-PHZ12
  • Sony BZ35
  • Newline Interactive TT-7519RS
  • Updated Sharp Display
  • Updated Cisco Telepresence
  • Updated Zoom driver to enable record
  • Updated VISCA driver to include UDP @ port 52381 and Header
• Redesigned Custom User Interface Design Tool for a simpler user experience.
• Added ability to import and export the Custom User Interface graphical pages.
• Added the ability to see 3rd party devices within AMS.
• Added the ability to customize the home page to display only what is needed.
• Added Room Scheduling summary as an optional dashboard section.
• Added the ability to view and edit the Complete Macro List from a single page.
• Added the ability to view and edit all Gateway Devices from a single page.
• Multiple panels with different User Interfaces are now supported.
• Added the ability to render virtual User Interfaces in native resolutions.
• Added the ability to duplicate rooms with IP address binding.
• Added the ability to assign the QR code to open a specific user interface for control.
• Panel sounds can now be enabled/disabled on browsers and other BYODs that are linked.
• Two-factor authentication for login is now supported.
• Added the search function for Gateway Variables.
• Updated Macro organization for ease of use.

Bug Fixes

• Zoom passcode now works for joining meetings.
• AT-OME-SW32 driver now no longer has an extra input or missing output.
• Border/Fill/Font colors now appear properly under assigned conditions on launch.
• Custom buttons now show their conditional state properly.
• Simplified VGW-SW redundancy configuration on the Virtual IP “bound” interface.
• Biamp audio slider now updating properly.
• Gateway Information is now displaying the correct data.
• In the conditions “If” statement the > and ≥ are now represented correctly.
• Linked gateway details now show up properly in the Explorer view.
• Background image no longer flashes when a clock has been added to the CUI page.
• Driver telnet control port no longer changes randomly.
• Improved connectivity on the Cisco Telepresence driver to prevent having to do a reconnect after saving settings.
• Improved scroll slider on VTP for Video Wall Source.
• Removed repeats on video remotes to improve performance.

Features

• New driver features added:
  • Daisy-chaining displays now supported with Samsung drivers.
  • Master audio slider and mute now supported on the AT-HD-SC-500 driver.
  • Updated command to input mapping on the Panasonic projector drivers.
  • Output analog and master audio control now supported with the PS62 driver.

Bug Fixes

• RS-232 display commands now correctly pass through the AT-OME-RX31.

Features

• Added support to configure timeout for fast switching in OmniStream FW version 1.2.7.
• Added ability to set output framerate for OmniStream FW version 1.2.7.
• Added support for registration of the AT-OME-PS62.
• Enhanced the load time for large button designs in custom UI.

Bug Fixes

• Custom UI backgrounds now render properly.
• RS-232 port parameters now sets properly on the 510W and MS52
• Moderator mode is now working correctly on the MS52.
• MS52 configuration page for USB routing now working as designed.
• Event Macro now copies correctly in Variable Updates.
• The latest Zoom Room API is now supported for started meetings from the meeting list.

Bug Fixes

• Weekly Event Macros can now be updated after they are created.
• Macros no longer randomly change order.

Features

• New Drivers added:
  • AT-OME-MH21
• Added an http health Check for the standby gateway to run every minute when Velocity redundancy is set up.
• Loading the Macro Cache now automatically refreshes the browser.

Bug Fixes

• Improved Biamp driver for increased Dialer and slider functionality. Tesira feedback and subscription requests updated.
• Polycom\Poly VC and Cisco telepresence drivers updated for increased functionality.
• Room On/Off macros no longer lose data or change commands when triggered.
• Privacy mute feedback now works correctly on the Poly and Cisco VC conferencing system drivers.
• AT-OME-MS52W now correctly displays SKU when discovered in Velocity.
• Home page macro button no longer loses web socket connectivity.
• Button overlay no longer disappears after 30-60 seconds.
• Velocity Zoom Room now no longer fails to connect to personal meeting.
• Custom UI button macros now render commands properly.
• Dashboard memory usage is now reading correctly.
• GAIN-60 TCP port no longer goes blank.
• SSL in HTTP driver now works with EVGR lighting.

Features

• New Drivers added:
  • Weinzierl BAOS777 with KNX integration support
  • Aten CS1922M
  • Draper Salara Screen
  • Poly G7500
  • Poly X30 and X50
• Home page now provides a single place to see sites, gateways, run times, and system status.
• Added the ability to link, view, and access multiple gateways from the home page.
• Velocity can now create custom QR code to scan for room control on personal devices.
• Room On/Off event macros can now be edited by the user.
• Multiple copies of rooms can now be created at once.
• Microsoft Exchange 2016 on premise scheduling now supported.
• Added support for SNMP trap notifications based on variable changes.
• Atlona devices can now be added and configured without the device being physically present.
• VGW-HW now comes pre-licensed.
• Added Input Switching support for the LEA amplifier driver.

Bug Fixes

• Updated room equipment search to make it more user friendly.
• Meeting times now update correctly on the Velocity Scheduling Panels.
• Locally starting a meeting no longer sends incorrect start times to GSuite.
• Volume sliders and mutes are no longer reset when passcodes are enabled.
• Room On/Off macros now throttle correctly while sending multiple commands.
• French accentuation updated.
• Background images now only display once on Custom UI pages.

Features

• New Drivers added:
  • AT-OME-MS52W
  • AT-HDVS-CAM-HDBT
  • AT-HDVS-CAM-HDMI
• Gateway IP address is now listed on the information footer.
• Updated the initial log in steps for an easier user experience.
• Added additional RS-232 zone commands to the AT-OME-PS62 driver.

Bug Fixes

• ANC-108D configuration files now correctly load for control.
• HTTP drivers no longer hide commands.
• Velocity no longer requires a restart when switching OmniStream between RS-232 and IP control.
• The Video Wall Macro now correctly appears inside the room control macro list.
• Entering the passcode no longer resets volume slider and mute values.

Features

• New Drivers added:
  • Behringer X32
  • LEA Amplifiers
  • Powersoft Mezzo
• Updated QSys DSP driver with additional dial pad numbers and distinct Qsys component names.
• Zoom Room driver now supports 11 digit meeting IDs.
• VCC-RELAY device variables added to the Velocity database.
• Velocity can now be rebooted through the API.

Bug Fixes

• Macro list now correctly scrolls when using Velocity on IOS.
• VCC-RELAY’s sensor now triggers when selected in Velocity.
• Macro set variable now sends the command delay when using the macro SET VARIABLE.
• Touch panels now correctly update the calendar when a meeting is canceled.

Features

• Added the ability to create two-way driver with Checksum.
• New Drivers added:
  • AT-OME-RX31
  • Symmetrix Jupiter 4
• New macro commands added:
  • FOR LOOP AND CALL
  • TIMER/CLOCK
  • SHOW HIDE DISPLAYS
• Multiple objects can now be selected at the same time within the Custom UI setup page.
• Added the ability to create multiple rooms at the same time.
• Context-based training video links added to many features (internet connection required).
• Added the ability to create variables and macros without a live connection to the device.
• “Reset all connections” changed to “clear all synchronizations” within the tools section and will now unsync all synced touch panels.
• UHD-SW-510W web UI updates to display features and configuration based on firmware version.
• Navigational menu updates for better user experiences.
• Updated Scheduling and Calendar to improve usability.
• Updated OmniStream driver for firmware 1.2.6 with simplified RS-232 support for Display Control.

Bug Fixes

• Uploading a new CSV file to generic calendar scheduling no longer causes duplicate meetings to appear on scheduling panels.
• Invited participants can now reliably join Zoom room meetings and keypad presses are no longer doubling numbers.
• Room Copy no longer duplicates the MAC address of the devices within the room to avoid multiple rooms trying to control/configure the same device.

Features

• Added the ability to turn off IP address following MAC IDs within server settings.

Bug Fixes

• Increased compatibility with CLSO-824 for MDNS discovery.
• Updated BOSE driver so it now correctly increases & decreases volume and shows the correct audio levels on page refresh.
• Horizontal sliders no longer shake when the device control menu is open or video is switched.

Bug Fixes

• Increased compatibility between Velocity Touch Panels and Velocity Gateway to improve synchronization.
• HTTP request timeout increased to improve Velocity firmware upgrade reliability.

Features

• New Driver added:
  • Amino IPTV Set Top Box

Bug Fixes

• Using the cloud log in on the gateway no longer closes the credentials pop up as soon as it appears.
• Improved functionality of RS-232 on the Biamp Tesira driver.
• Copying, exporting, and importing rooms with ANC-108D no longer removes all macros.
• Clear and backspace commands now function correctly in the Symetrix driver.
• VGW-250 now correctly updates license when upgraded to Velocity 2.0+.

Features

• Velocity and AMS now merged into one software.
• New room structure licensing for Velocity activated.
• Room Scheduling integration with Outlook 365 and GSuite utilizing AT-VTP and AT-VSP added.
• Added the ability to have different UIs appear in the control screen based on passcode logins.
• New Drivers added:
  • AT-OME-PS62
  • AT-HDR-H2H-88MA
  • Panduit PDU P08E16M
• OME-PS62 commands integrated into the macro command lists.
• Date and time can now be added to the control screen.

Bug Fixes

• TCP communication port now defaults to port 23 when building a Telnet driver.
• Network scanning upgraded for Atlona devices.
• Remote drawers now close when clicking off of the remote control in the control screen.
• Clicking on the room url links no longer takes the user to the building level view.
• Microphone mute in the microphone drawer now works correctly when using the VTP-800.
• Fixed issue where the image folders would not collapse and would stay expanded out.
• Removed commands for the OMNI-232 driver. They did not actually exist in the API.
• Custom UI icons now appear when proxying from the Velocity cloud to a gateway.
• Fixed issue where the Room Reports fields would be visible on the slide out left side drawer.
• Input selection for the HDBT port on the Juno-HDBT driver now switches correctly.
• Custom driver DSP commands now work when connected by RS-232.
• Control screen spinner no longer remains onscreen for a lengthy time period any time a button is pressed.
• Importing and exporting rooms no longer causes macro variable conditions to disappear.
• Replacing header buttons with images no longer cause button presses to become unresponsive.

Features

• New Drivers added:
  • AT-DISP CTRL
  • AT-OME-RX21
  • AT-OME-MS42
  • Clear One Collaborate Basic Remote
  • Ecler devices
  • Bosch PLM-8M8 DSP
• Access to specific room controls without logging into Velocity can now be granted to outside presenters/users on the same network with a custom URL.
• Added the ability to categorize variable groups.
• More hover hints added for Velocity functionality and Room Problem Reporting.
• Variables can now be deleted in groups.
• Added a button to show all individual VTPs and BYOD connections with ID, connected page, IP address, time of last use, and connection type.
• Macros can now be added to page navigation events.
• Added Conditions button to Room Control Options with the ability to separate the conditions by room or global.
• New Automatic toggle function added for custom buttons, creating a variable that will switch between 0 and 1 when the button is pressed.
• Added ability to create toggle groups so that a group with multiple variables would switch all other variables to 0 if only one could be true.

Bug Fixes

• CLSO-601 input status now correctly displays.
• iOS app on iOS 13 no longer slides up and down on the screen when dragging sources.
• UHD-PRO3 input status now shows correctly when recalling a preset.
• Velocity log size no longer causes the gateway to slowdown.
• OmniStream fast switching commands now work when in Device groups.
• OME-SR21 driver now functions correctly.
• Auto answer on the Tesira driver no longer throws errors.
• Mute block for the Tesira driver now correctly imports.
• Percentage sliders now correctly calculate for negative integers.
• Video mute commands now work correctly on the 510W driver.
• Fixed issues with Zoom Room driver where ‘Meet Room’ function would not work, users couldn’t navigate to the phone tab, and users couldn’t leave a meeting unless content was no longer being shared.
• Video wall control UI no longer becomes shrunk and distorted when other pages are refreshed.
• Page navigation through macros no longer causes the VTP to become stuck on a blank white screen until the system is rebooted.
• Variable button image changes now occur correctly even when no default icon is set.
• Velocity keep alive command for 510W now increased to over 10 seconds to avoid slow downs due to over polling.

Features

• New Drivers added:
  • Extron MVC 121 Plus (DSP) and IN1606.
• Added keepalive functionality to the BenQ Projector driver.
• OPUS matrix drivers now have independent video and audio switching macro commands.
• Events can now be triggered by dragging and dropping buttons on the Custom UI page.
• OmniStream Videowall now supports portrait mode.
• The Zoom Room driver now supports privacy mute.
• The Media menu within the Custom UI screen now shows icons in use within all rooms.
• Velocity password recovery can now be done with email and no longer requires a license.
• Text fields can now be added to the Custom UI, allowing for adjustment of variable values on the control screen.
• Macro command parameters can now be replaced with selected variables.
• Added slider with adjustable variable value field for use with generic level/volume/lighting control.
• Bootup macros can now be created for each room, that will execute when the gateway reboots.
• Custom UI buttons can now be copied, pasted, and deleted within the edit page using CTRL + C, CTRL + V, and Del.
• Added master page overlay to Custom UI, which allows for communal functions (buttons/sliders/etc) that will be persistent over all associated pages.

Bug Fixes

• AT-HDVS-SC-RX driver now supports CEC control.
• NEC display driver power off command is now correct within the database.
• Tools is now relabeled Variables within the Custom UI page.
• Bose Control Space driver no longer slows Velocity with continuous queries.
• Velocity Gateway no longer locks up on reboot if a large amount of control pads are on the network polling.
• Set speaker zones within drivers can now be deselected.
• Building names now correctly show in the headers.
• Network scan no longer randomly runs continuously.
• AV source icons now scale correctly on the home page.
• DBX driver no longer has import control button.
• The control screen no longer goes blank when the browser cookies are cleared.
• UHD-SW-5000ED driver now has audio controls.
• Driver commands with string variables no longer incorrectly send integer variable parameters.
• Variables can now be accessed through Room Control Options.
• Room Control Options can now be accessed through the Custom UI page.
• OmniStream single channel encoders/decoders no longer have extra configuration fields.
• Volume sliders no longer change when the MIC options are opened.
• Source icons now show the correct state when on the control screen.
• Apply source events now trigger correctly.
• Database files can no longer be incorrectly loaded as firmware.
• Vertical slider length is no longer fixed after associating to a DSP.
• Cisco driver no longer disables auto answer when it connects to Velocity.
• Room report no longer sends false alarms when redundant gateways disconnect and reconnect.
• Imported room variables can now be deleted.
• Mute all video button now functions correctly.
• Button icons now show in the setup page preview.
• MIC mute now works when using the VTP-800.
• Vertical sliders now remain within the defined ranges of the associated DSP driver.
• Audio switching now occurs without video attached.
• Increased Chrome browser compatibility, so custom driver creation saves correctly.

Features

• New Drivers added:
  • Cisco Telepresence SX for CE firmware
  • Cisco Telepresence with Telnet control
  • Klark Teknik DM8000 DSP
  • Sony PCS-XG77 Telepresence
  • Panduit PDU P08E16M (basic power port on/off functionality)
• Added MIC / Line level controls for the AT-UHD-CLSO-824.
• Macro variables now display grey or green to indicate if there are conditions attached to the macro.
• iFrame URLs can now be changed with variables.
• DTMF now supported on the CISCO Teleconference Driver.
• VTPs can now use the room navigation and is no longer limited to the room it is added to.
• Added the ability to mirror control screens across all touch pads. All touch pads in the room will switch to new pages when another pad navigates to different control screens.
• Volume control sliders are now longer.
• OmniStream decoder multicast settings can be saved and recalled to a single or full group of decoders.

Bug Fixes

• SW-510W device authentication no longer slows Velocity down.
• The Navigate button now correctly shows when enabled.
• Macro screen separation lines now display correctly.
• Button scaling no longer causes the control screen to only partially display the buttons.
• Device group commands now execute correctly when selected.
• Buttons no longer misread presses as clicks, so that buttons now execute correctly.
• Video wall drop zones now scroll properly.
• AT-HDVS-SC-RX volume control and mute now function as designed.
• Cisco SX contact lists now update on refresh when a new contact is added.
• Cisco Alias sources now populate on the control screen correctly.
• GAIN-120 no longer loses output gain and mute variables when Velocity is updated.
• Audio and Dialer settings now load correctly when rooms are imported.
• DSP sliders now correctly adjust volume levels.
• Rest API authentication and HTTPS now supported on the SW-510W driver.
• Improved reaction times for on-touch events for phones and tablets, to avoid missed selections and button presses.

Features

• New Drivers added:
  • Cisco Telepresence SX
  • Cisco Telepresence Touch SX, DX, MX
  • Cuety lighting
  • Symetrix Radius POTS support
  • Panasonic PTZ Camera AW-HN38
  • Wattbox IP controllable Outlet
  • AT-OME-PS62
  • AT-HDR-H2H-88MA
• Added new Zoom Room API additions:
  • Added the ability to control USB cameras connected to the Zoom Room computer
  • Users can now be expelled from meetings
  • VOIP now added to dialer and invite screen
  • Hosts can now be claimed or changed
• Added OMNI-232 audio level control
• Added the ability to add HTTP drivers
• Added HDVS-200-RX audio control
• New default names added for Macros
• Rooms can now have multiple speakers added, instead of just one, controlled by the master volume
• Added the ability to reorder rooms
• Video remote close now added to Macros
• Video wall now supports pop out remote drawer
• Source drop down menu can now be hidden on the control screen
• Video Wall event macros now available
• Start and stop macros added
• Emails can now be sent through macros
• Room Problem Report page added for viewing disconnected devices
• AND and OR conditional logic added for macros
• IP combined connections can be separated or combined
• Drag and drop image button creation added to custom UI page
• User permissions can now be adjusted to adjust room access
• Append variable added to help with creating custom dialers, keyboards, and passcodes
• Vertical DSP sliders can now be added to custom UI pages
• Volume sliders can now be adjusted by % instead of dB
• Web view iframe can now be added to custom UI pages
• Cloud connections can now be enabled/disabled
• Generic UDP listener driver can now be created by users

Bug Fixes

• Custom UI media browser enhanced
• Fixed Zoom Room stop and start share content functionality
• Opus Keep Alive command changed to 0A
• PRO3-66M/88M RS232 zone commands now work correctly
• AT-HDVS-210U now correctly switches inputs
• Telnet driver now defaults to port 23
• View ID now correctly displays on Trigger Macros
• Sites page now laid out in an easier to use configuration
• Dashboard icons are no longer clickable unless visible
• Room states now correctly transer when using Room Copy
• IP connection will now share with Imported rooms
• Custom UI buttons no longer trigger other buttons when pressed
• Lighting enable and disable buttons now function correctly
• Handle now shows correctly on the custom UI sliders

Bug Fixes

• Loading times for custom UI pages accelerated.
• Telnet drivers that send login information now deliver it with a carriage return and line feed.
  

  Note: If a driver was previously edited to include the cr and lf, it should be reverted back.

• Images are no longer duplicated when rooms with custom images are imported.
• Debounce (delay) added to variable states to keep external triggers from registering too many times.
• Room card stock images will now change when selected in room options.
• When using a DBX driver, changing filters or gates no longer changes IDs and breaks control.
• Dialer keypad increased in size.
• Ranges are now correct in CLSO audio sliders.
• Velocity no longer slows down over time when using Atlona drivers that support RS-232 zone command feedback with specific characters such as CR, LF, and CR-LF.

Features

• Volume slider can now be adjusted incrementally.

Bug Fixes

• Custom UI pages now load quicker and take less time to render and respond to button presses.
• Custom images now properly show up on the custom UI pages.
• Home screen buttons no longer shrink too much when there are more than 4 buttons on the page.
• CLSO switcher volume slider correctly renders on the control screen.
• Objects no longer render incorrectly on custom UI pages, increasing stability and avoid page errors.

Features

• New Drivers added:
  • Ashly Pema 4125 Amp
  • Ashly Pema ne24.24M
  • Cuety LPU-1 and LPU-2
• Added the ability to restart all connected VTP-800 and VTP-550 devices from the server settings tools.
• Added the ability to restart individual VTP-800 and VTP-550 devices from the macros.
• Added the clear redundancy button to the redundancy interface. This button clears all values and sets the redundancy settings to factory-default.
• Added button to reset network settings to factory-default.
• Updated the VCC-RELAY driver with more selectable macro commands.

Bug Fixes

• Removed the enable redundancy switch. Now when all fields are populated and saved, those settings will be pushed.
• Removed redundancy backup every 5 minutes, which caused too much stress to the redundant system. Backup now occurs once a day at a selectable time.
• Fixed issue where Velocity touch panel would display a blank white screen, when in redundant mode and restarting the gateway.
• Improved stability to the redundancy system, where:
• Sometimes the VTP device would switch to a blank white screen.
• Sometimes the VTP device would need to be re-synced.
• Sometimes when redundancy occurred, and the primary gateway came back online, it would not take back control of the system.
• Fixed an issue in ZoomRoom where the Join would cause the VTP device to go back to the Main page.
• Fixed an issue where after a database restore was executed, the gateway would require a manual reboot to complete.
• Fixed an issue where video mute for the AT-UHD-CLSO-824 was reversed.
• Fixed an issue where room trigger events would not parse Hex data, thus room triggers receiving hex values did not trigger properly.
• Fixed an issue where video drop zones on the Video Wall control screen were not appearing correctly.
• Fixed an issue where using a PIN code, when unlocking the screen, would prevent navigation to a custom control page.
• Fixed an issue where some of the separation lines on the control screen did not change to the proper color when a color theme was selected.

Features

• New Drivers added:
  • NEC LCD MultiSync Displays
  • Panasonic PT-TW231R Projector
  • AVer M70 Document Camera
  • Audac AMP523 Amplifier
• Added ability to exclude specific control panels from locking.
• Absolute values in DSP creator volumes can now be enabled in Velocity, disregarding negative values and sending only absolute values.

Bug Fixes

• Identify now works correctly in the video wall configurator when fast switching is enabled.
• Control screen lock page keypad no longer appears too small on VTP 550 control panels.
• Old images and macros leftover from deleted rooms can be deleted from the database.
• VCC-IR commands now time out after 30 seconds or after a button is pressed on the control screen, to avoid VCC-IR lock ups.
• Adding more custom control pages now no longer causes the control pages to slow down.
• Zoom Room:
  • Deleted Zoom Rooms are no longer visible in the control screen navigation.
  • VTP 800 control interface now correctly displays more than 4 shared sources.
  • Zoom Rooms no longer lock up after they have been disconnected and reconnected to the network.
  • Zoom Room to Zoom Room calls can now be answered correctly.
  • Zoom Room content share can now be properly turned off.

Features

• New Drivers added:
  • Shure MX910 Microphone (two way)
  • Shure MXA310 Microphone
  • Shure P300IMX DSP
  • Shure ANIUSB DSP
  • Atlona OPUS
  • Yealink and Video Conference Driver
  • Atlona AT-OME-ST31
  • Atlona AT-OME-SW32
  • FutureNow FNIP-4xSH
  • Philips BDL8470EU
  • Viewsonic CDE-5010
  • Viewsonic IFP7550
  • Extron XTP II CrossPoint 1600 Switcher
  • Lutron RadioRa 2 One-way TCP driver
  • Moxa IP to Serial converters
• Added ability to create matrix drivers (video and audio) with variables.
• Added ability to create one-way DSP sliders in drivers.
• Added new Videowall control screen interface.
• Added ability to add a custom control Gui interface.
• Added the ability to create toggle macros” If this else”, as well as “if this” macro based off of variable creation.
• Added ability to create macros to Navigate page jumps.
• Added ability to create macros to Navigate room Jumps/pages.
• Added ability to create an audio only page.
• Added help icons with information and video links.
• Added ability to set custom scan ranges.
• Added ability to create a Velocity Cloud account from the Velocity Gateway.
• For SSL, added the ability to create a CSR from the Velocity Gateway.

Bug Fixes

• Disabled automatic multicast assignment for OmniStream encoders and decoders.
• Fixed issue where sending zone commands through the HDVS300 would sometimes cause a temporary TCP disconnect.
• Fixed issue where API command to run the video was not executing correctly.
• Fields no longer require a full page refresh to populate updated changes.

Features

• New Drivers added:
  • Axis V5915 Network PTZ camera
  • Shure P300IMX DSP (two way)
  • Shure MX910 Microphone (one way)
  • Shure ANIUSB-MATRIX (one way)
  • DirecTV Genie HTTP Control

Bug Fixes

• User created roles no longer lose all their permissions when Velocity is updated.
• Lock screen pin codes now save on the setup page correctly.
• Fields/permissions within user created roles no longer duplicate.
• Sources no longer duplicate randomly when there are more than 3 pages of sources.
• Fields no longer require a full page refresh to populate updated changes.

Features

• Driver for AT-HDVS-SC-RX added.

Bug Fixes

• Split rooms within macros now save correctly.
• Combining devices for Video Wall ID references no longer cause the OmniStream devices to disappear.
• QSC POTS Dialer now works as intended.

Features

• Velocity Cloud accounts can now be manually added by users.
• Added lighting protocol control.
• Control page icons and labels are now fully customizable.
• New Drivers added:
  • Atlona: AT-OME-TX21-WP-E
  • Harman DBX ZonePro1260M DSP
  • ClearOne Converge Pro 2 DSP
  • QSC QSys Core DSP dialer
  • DA-Lite SBC-100
  • SMART Board MX Series Display
  • Clevertouch Displays v510
  • Vivtek Novotouch LK8630i Display
  • Mediasite RL220 Recorder
  • Christie LCD Display FHD551
  • Yamaha MTX-5D DSP
  • Art-Net Lighting
• Velocity can now process HTTP Requests through cURL commands.
• Velocity now provides API commands for video wall presets and macros.
• Velocity is now able to send the Wake On LAN “magic packet”.

Bug Fixes

• Improved search to now include both equipment and manufacture in the same search.
• Serial commands sent to Atlona products now throttle correctly.
• Video wall no longer changes resolutions when unintended.
• Throttling commands no long cause Velocity to slow down or the touch-pads and control screens to have connection issues.
• Identify function can now be turned off when using the Video Wall Configurator.
• Velocity gateway no longer sends device on commands when it is restarted.

Features

• Added QSC dialer to QSC DSP driver.
• Added ClearOne Converge dialer to ClearOne DSP driver.
• Displays can now be hidden at the room level.
• OmniStream devices can now be fully configured within Velocity.

Bug Fixes

• IP addresses now correctly assign to displays.
• Custom control screen background no longer randomly reverts to default color.

Features

• IP range can now be set when scanning a network where the subnet range is greater than 512.
• Remote buttons are now action customizable. Separate commands can be set to occur when the button is pressed and released.
• Control screen timeout passcode has been added. The control screen will lock after no adjustments have happened in the set about of time and require a passcode to unlock. Multiple passcodes can be set and must be 2 to 8 numbers long.
• New Drivers added:
  • Atlona: AT-HDR-M2C-QUAD
  • Harman HiQnet protocol
  • Phoenix Condor MT600 DSP/Mic array
  • TCL Roku TV
  • Shure MXA910 Mic array (one-way)
  • Shure ANIUSB Dante Interface (one-way)
  • Digital Projection E-Vision Laser 10K
  • Hitachi LP-WU6600
  • Tascam Blu Ray Player (one-way)
  • Integra AVR (one-way)
  • Yamaha AVR CX-A5100 (one-way)
• Added Zoom Room support for USB device selection and native zoom room interface
  support of the AT-HDVS-CAM.
• Specific multicast ranges can now be excluded from issuing.
• AT-UHD-SW-510W driver now supports CEC and Moderator Mode (beta).
• OmniStream drivers now support video wall configuration and CEC.

Bug Fixes

• Multiple simultaneous touch pad synchronizations no longer result in some of the
  requests being lost.
• Control panels will now successfully unsynchronize from rooms reliably.
• Sony VPL Projectors drivers updated

Features

• Added Biamp Audio/Nexia Protocol.
• Roku External Control API HTTP driver added.
• Added Clearone Converge Pro 2 API driver.
• Wake On LAN command now added to macro configuration.
• Generic TCP, UDP, Telnet, and SSH drivers added

Bug Fixes

• Hex value macros are sending correctly now.
• Symetrix Dialer now shows the appearance manager when using the dial pad.

Features

• Added Driver Support for AT-GAIN-120 and AT-GAIN-60.
• Added Connection/Disconnection status on the control screen.
• Standby status now displays on the control screen.
• New drivers added:
  • TCP keep alive command added.
  • Added default commands: Power on, power off, volume +, etc.
  • Added the ability to set commands as input commands to allow for autoswitching when a command is triggered.
  • Commands can now be copied between different protocols.

Bug Fixes

• Search now default searches for Equipment within the Equipment Catalog.
• OmniStream now auto discovers correctly through MDNS.
• Improved DSP Audio Slider and Mute performance with local caching.
• Improved compatibility with OMNI 311 and 324.
• Telnet connections no longer duplicate on equipment add and reconnect.
• Minor bug fixes to improve stability of Velocity.

Features

• Added Active Connections within server settings to show BYOD and VTP connections.
• Added the ability to create custom UIs using JavaScript.
• Added the ability to gropu like devices together for single button control of all devices in the group.
• New driver settings added:
  • TCP keep alive command added.
  • Added default commands: Power on, power off, volume +, etc.
  • Added the ability to set commands as input commands to allow for autoswitching when a command is triggered.
  • Commands can now be copied between different protocols.
• Split rooms ability added.
  • Independent volume control for all, left, and right sections of split rooms.
  • Room state macros added with the ability to set each command to a room state.
  • Event triggers added for when rooms split and open.
• Added Zoom Room support.
  • SIP calling, start/stop meeting recording, and transfer host not supported at this time.
• AT-ANC-108D can now be factory reset through Velocity.
• Remote updates for Atlona products can now be enabled and disabled.
• Drag and drop source switching can now be enabled and disabled.
• Display and source labels can now be hidden.
• The ability to hide/show macro buttons on the control pages.
• Dial pads for DSPs and teleconferencing devices/programs added.
  • Added event triggers for dial pad MIC mute/unmute.
  • Event triggers added for when a meeting is started/stopped
  • Incoming and declined calls can now have event macros mapped.
• New Drivers added:
  • Atlona: At-HDR-H2H-88MA, AT-OMNI-311, AT-OMNI-324, AT-HDVS-210H-TX
  • Audio-Technica ATDM-0604 Digital Smart Mixer
  • Biamp Tesira (TCP)
  • BSS DSP (TCP)
  • Denon: DN-500BD MKII, DN-500AV, DN-700AV
  • EIKI Projector
  • Extron SMP 111
  • Hitachi DLP Projector
  • Kramer: 8×1, VP-440 6×1, VP-444 12×1, VP-774A
  • NEC Display 1
  • NEC Projector RS232 TCP (ID 0)
  • Panamax M4315-PRO
  • Philips Q-Line Displays
  • Planar QE Series Display
  • Qomo Display QIT1375
  • Somfy URTSI
  • Streamplay SP-1
  • Toshiba Projector TDP-XXXX
  • Vaddio EasyUSB Mixer_Amp
  • Vivitek Projector DH3331
  • VTune-Pro-4K
  • WattBox

Bug Fixes

• Macro names are now saving correctly.
• Fixed issue where connecting to a gateway through Velocity Cloud would result in Java script errors.
• Volume sliders now appear correctly on control pages no matter the resolution.
• Improved connection stability with OmniStream devices
• CLSO-840 now supports audio on all 4 outputs instead of 2.
• Increased stability of the technology selection menu.
• VTPs no longer count under BYOD licenses.
• TCP connections are now fully compatible with Macro commands.
• Backups no longer fill Velocity memory.
• Improved stability and performance.
• Control page background image no longer disappears when the start page is hidden.

Features

• Split room compatibility added.
• Added Symetrix DSP control import and macro commands.
• Added QSC DSP control import and macro commands.
• Added DSP and slider support for all CLSO models.
• AT-UHD-SW-510W now added to equipment.
• Redundancy virtual IP address now added for touchpad control.
• Added the ability to perform IR learning through AT-VCC-IR.
• Control page background and borders now customizable.
• Trigger events now respond to driver feedback.
• Added room on/off delay timer.
• Added 802.1x network security.
• The ability to enable and disable control screen icons has been added.
• Remote buttons now resizable.

Bug Fixes

• When programming commands, HEX is no longer converting to ASCII automatically.
• Equipment is now being found correctly when searching in the Equipment Modify page.
• Removed double click source switching, moving to drag only switching.
• UDP responses no long cause connection loss.
• Devices no longer show as connected when they have been physically disconnected from the network.
• Improved compatibility with AT-VCCs.
• Minor bug fixes to improve stability of Velocity.

• Factory firmware