NOTE: The AT-HDVS-TX-WP-UK is discontinued. The AT-HDVS-150-TX-WP-UK is the new version of this product and is part of the HDVS-150 Series. Please visit the HDVS Series overview page for more information.
HDMI and VGA/Audio to HDBaseT Switcher Transmitter Wall Plate – UK
The Atlona AT-HDVS-TX-WP-UK is a 2×1 HDBaseT™ switcher transmitter for HDMI and VGA transmission with display control over category cable. It features an HDMI input plus VGA input with 3.5mm audio connector and a two-gang, UK-style wall plate enclosure. The transmitter combines the benefits of a multi-format switcher with built-in auto switching and the advantages of long-distance signal extension over a single cable. AV signals up to 1080p/60Hz and 1920×1200 video with embedded multi-channel audio and control signals can be extended up to 230 feet (70 meters). Remote power for the transmitter is provided via Power over Category cable (PoCc) from an AT-HDVS-RX receiver or AT-UHD-CLSO-612 switcher. Designed for use with the AT-HDVS-RX receiver, the transmitter/receiver pair enables auto display on/off, auto-switching, 3rd-party control, and other features. The AT-HDVS-TX-WP-UK fits inside any 40 mm deep 2-gang electrical box or mud ring and is ideal for long distance transmission and display control in corporate or educational settings using analog and digital sources. Also available as the AT-HDVS-TX-WP with 2-gang US wall plate.
Features
UK, 2-gang wall plate
- Shallow, 35mm (1.4 in) deep wall plate simplifies integration with top-mounted captive screw connectors
- Attractive alternative to table top boxes for placement near presenter’s station
2×1 HDBaseT™ switcher transmitter
- Features an HDMI and VGA input with 3.5mm audio connector
- Allows advanced HDMI display devices to be used with legacy VGA sources
Long distance HDMI extension
- Transmits HDMI and VGA/Audio signals up to 230 ft (70m) @ 1080p over CAT6a/7 and 197 feet (60 m) @1080p over CAT5e/6
- Uses easy-to-integrate category cable for low-cost, reliable system installation
Auto-switching
- Selects active input when sources are connected or if there is a change in source power status
- Eliminates need for complex control system in small AV systems
Front panel Input Select button
- Overrides auto-switching when two active sources are present
- Simple manual control allows presenter to maintain control of AV system
Auto display control
- Automatically changes projector power state as sources are connected or removed from inputs
- Eliminates need for complex control system in small AV systems
Front Panel Display On/Off control
- Remotely controls display power state; provides alternate ‘Display Mute’ mode
- Eliminates need for manual operation of display or IR remote control
Remote-powering over category cable
- Supports Power over Category cable to receive power from receiver or AT-UHD-CLSO-612 switcher over the same category cable used for AV and control signals
- Eliminates local AC outlet required for transmitter plus saves time and integration costs
Multi-channel audio compliant
- Supports PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, and DTS-HD Master Audio™
- Allows any multi-channel audio stream to be used within a professional audio system
RS-232 control
- When used with the AT-HDVS-RX or CLSO Series switchers, input selection can be made from a 3rd party control system
- Seamless integration with larger, control system-based AV systems
Front panel Link LEDs
- Illuminates when receiving power/signal from compatible receivers
- Provides easy setup and troubleshooting
Suggested receivers:
- AT-HDVS-RX – HDBaseT to HDMI Scaler Receiver with Display Control
- AT-UHD-CLSO-612 – 6 input multi-format switcher with HDVS compatible inputs
- AT-PS-POCC – provides power to PoCc wall plate when used with HDBaseT input on display
To view the product warranty, use the following link: https://atlona.com/warranty/
- Ensures long-term product reliability and performance in residential and commercial systems
- Specify, purchase, and install with confidence
Analog to Digital Transition
The Atlona HDVS series was designed to smooth the transition from analog to digital displays, allowing advanced HDMI display devices to be used with legacy VGA sources. The series also adds the simplicity and performance of HDBaseT technology to eliminate multiple cable runs and signal degradation that can occur with long transmission lines. Cost-effective and easy-to-terminate category cable provides additional integrator and benefits.
The AT-HDVS-TX-WP-UK offers auto-switching between both HDMI and VGA inputs. HDBaseT and power over category cable (PoCc™) allow the sources to be up to 230 feet (70 meters) from the display. A single category cable carries both signal, control, and power. Combined with AT-HDVS-RX, display power is easily controlled with the transmitter. Auto Display On/Off eliminates the need for a control system.
Benefits when used with AT-HDVS-RX
- Auto display On/Off
- Auto input switching
- HDCP management for use with teleconference systems
- Set preferred input resolution for both VGA and HDMI sources
- PoCc to eliminate the power supply at the transmitter
- Enables display control from the transmitter
- RS-232 input selection from 3rd party controller
- Easy to use software simplifies RS-232 programming
Integrates with CLSO Series Switchers for complex systems
The AT-HDVS-TX-WP-UK is designed for use with the AT-UHD-CLSO-612 in rooms where multiple input zones are required. Two zones, each with an AT-HDVS-TX-WP-UK, provide one HDMI and one VGA input auto-switched to an HDBaseT output for routing to the AT-UHD-CLSO-612 which provides power to the transmitter using PoCc to simplify system installation. This greatly expands the capability of a CLSO-based AV system.
