The Atlona AT-UHD-EX-100CE-RX is a 4K/UHD HDMI over 100M HDBaseT receiver for AV signals up to 330 feet (100 meters) over category cable with Ethernet, RS-232, and IR control pass-through, plus Power over Ethernet. It is compatible with signals up to 4K/UHD @ 60Hz with embedded multi-channel audio and remote 48V power for the receiver. The AT-UHD-EX-100CE-RX is HDCP 2.2 compliant and supports EDID communication. The receiver features a quarter rack width metal enclosure for installation with rear panel I/O ports for uncluttered wire management. Use with an optional AT-IR-CS-RX IR receiver cable to capture IR remote commands for AV system control.
This receiver is used in commercial and applications that call for an HDBaseT receiver with a compact form factor that allows for simple mounting behind displays and at projectors. These applications will not require an AC outlet for the receiver, since the receiver is powered by the Atlona switching product. This receiver will also be used to simplify control of the AV system by working with 12 volt-based IR receivers as well as passing through Ethernet and RS-232 commands.
Product Compatibility
The AT-UHD-EX-100CE-RX is compatible with the AT-UHD-EX-100CE-TX transmitter, as well as Atlona switchers, matrix switchers, and distribution amplifiers with HDBaseT outputs. See below for a list of compatible products.
NOTE: Ethernet pass-through is not available with AT-UHD-EX-100CE-RX receivers connected to UHD-PRO3 Series matrix switchers. More information is available in the Atlona Help Center.
| Product | Description |
|---|---|
| AT-IR-CS-RX | IR Receiver Cable for PoE Extenders |
| AT-UHD-EX-100CE-TX | 4K/UHD HDMI Over 100 M HDBaseT Transmitter with Ethernet, Control, and PoE |
| AT-UHD-CLSO-601 | Six-Input Multi-Format Switcher with Mirrored HDMI / HDBaseT Outputs |
| AT-UHD-CLSO-824 | 8x2 Multi-Format Matrix Switcher with Dual, Mirrored HDMI / HDBaseT Outputs |
| AT-UHD-SW-5000ED | Five-Input HDMI / HDBaseT Switcher with Mirrored HDMI / HDBaseT Outputs |
| AT-HDR-CAT-4ED | Four-Output Extended Distance 4K HDR HDBaseT Distribution Amplifier |
| AT-RACK-1RU-ME | Multi-extender Rack Mount Shelf |
Atlona UHD-EX Series
The AT-UHD-EX-100CE-RX is part of the Atlona UHD-EX Series of HDBaseT extenders. See below for a complete listing of transmitters, receivers, and extender kits.
| Product | Device Type | HDBaseT Transmission* | 4K/UHD & HDR Capability | Signals Extended | Device Powering | Atlona Switcher Compatiblity | Additional Features |
|---|---|---|---|---|---|---|---|
| AT-UHD-EX-70C-TX | Transmitter | 230 feet (70 meters) | 4K/60 4:2:0 4K/24 HDR10 130 feet (40 meters) | HDMI RS-232 IR | Local powering | SW-5000ED and CLSO Series with HDBaseT inputs | Ideal for extending AV and control to an HDBaseT-equipped projector |
| AT-UHD-EX-70C-RX | Receiver | 230 feet (70 meters) | 4K/60 4:2:0 4K/24 HDR10 130 feet (40 meters) | HDMI RS-232 IR | Remotely powered by AT-UHD-EX-70C-TX or Atlona switcher | UHD-PRO3, UHD-CAT, SW, CLSO, and HDVS-200 Series with HDBaseT outputs | |
| AT-HDR-EX-70C-KIT | Transmitter + receiver kit | 230 feet (70 meters) | 4K/60 4:4:4 4K/60 HDR10 Dolby Vision @ 30 Hz 130 feet (40 meters) | HDMI RS-232 IR | Receiver powered by transmitter | ||
| AT-HDR-EX-70-2PS | Transmitter + receiver kit | 230 feet (70 meters) | 4K/60 4:4:4 4K/60 HDR10 Dolby Vision @ 30 Hz 130 feet (40 meters) | HDMI only | Local powering at transmitter and receiver | ||
| AT-UHD-EX-100CE-TX | Transmitter | 330 feet (100 meters) | 4K/60 4:2:0 4K/24 HDR10 | HDMI RS-232 IR Ethernet | Local powering | SW-5000ED and CLSO Series with HDBaseT inputs | Ideal for extending AV and control to an HDBaseT-equipped projector |
| AT-UHD-EX-100CE-TX-PD | Transmitter | 330 feet (100 meters) | 4K/60 4:2:0 4K/24 HDR10 | HDMI RS-232 Ethernet | Remotely powered by AT-OME-RX11 or Atlona switcher | SW-5000ED and CLSO Series with HDBaseT inputs | |
| AT-UHD-EX-100CE-RX | Receiver | 330 feet (100 meters) | 4K/60 4:2:0 4K/24 HDR10 | HDMI RS-232 IR Ethernet | Remotely powered by AT-OME-RX11 or Atlona switcher | UHD-PRO3, UHD-CAT, SW, CLSO, and HDVS-200 Series with HDBaseT outputs | |
| AT-HDR-EX-100CEA-KIT | Transmitter + receiver kit | 330 feet (100 meters) | 4K/60 4:4:4 4K/60 HDR10 Dolby Vision @ 30 Hz | HDMI RS-232 IR Ethernet | Receiver powered by transmitter | Provides audio return pathway |
* To achieve optimal HDBaseT performance, CAT6a or CAT7 shielded twisted pair cable is highly recommended.
Atlona HDR-EX Series
Also available from Atlona are the HDR-EX Series for extending 4K HDR and control signals over HDBaseT.
| UHD-EX Series | HDR-EX Series | |
|---|---|---|
| Highest resolution | 3840x2160 @ 60 Hz up to 4:2:0 | 3840x2160 60 Hz up to 4:4:4 |
| HDR10 | Yes (up to 4K @ 24 Hz, 10-bit, 4:2:0) | Yes (up to 60 Hz) |
| Dolby Vision HDR | No | Yes (up to 30 Hz) |
| Legacy cable set-top box support (Cisco, Scientific Atlanta) | No | Yes |
| Auto EDID correction | No | Yes |
| Hot plug detection (HPD) management | No | Yes |
| HDBaseT cable test mode | No | Yes |
Features
4K/UHD capability
- Compatible with Ultra High Definition sources and displays
- Full support of 4K/UHD streaming services and playback devices
HDCP 2.2 compliant
- Adheres to latest specification for High-bandwidth Digital Content Protection
- Allows protected content stream to pass between devices
Supports 4K HDR10 @ 24 Hz
- Extends 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
Remote-powered receiver
- Industry standard IEEE 802.3af PoE for receiver is supplied by transmitter over HDBaseT
- Saves time and integration costs
AV, Ethernet, power, and control over HDBaseT*
- Receives 4K/UHD video, audio, 100Base-T Ethernet, power, and control through a single cable
- Eliminates multiple cable runs between source, control system, router, and display
- * Ethernet pass-through is not available on the AT-UHD-EX-100CE-RX receiver when used with the UHD-PRO3 Series matrix switchers.
Extended distance HDMI extension
- Receives HDMI signals up to 330 ft (100m) @ 1080P with CAT5e/6 or 4K/UHD using CAT6a/7 cable
- Uses easy-to-integrate category cable for low-cost, reliable system installation
Flexible Bidirectional IR control capabilities
- IR Input designed to work with 12V IR receivers for source control
- Saves control systems costs
Rear panel I/O connectors
- Placement of ports on rear panel simplifies wire management
- Saves installation time and eliminates clutter
Multi-channel audio compliant
- Supports PCM, Dolby Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, DTS:X™
- Allows any multi-channel audio stream to be used within a professional audio system
Field updatable firmware
- Front panel USB port provides an easy means for kit upgrades
- Ensures long term system return on investment
Front panel Power and Link status LEDs
- LED indicators provide power and HDBaseT link status information
- Provides easy setup and troubleshooting
Low-profile, 1 inch (25 mm) high quarter rack-width enclosure
- Easy installation into confined spaces behind displays and above projectors
- Keeps devices out-of-sight when placed in public spaces
Included accessories
- User guide, IR emitter P/N AT-IR-CS-TX, mounting brackets
Product Warranty
- To view the product warranty, use the following link: https://atlona.com/warranty/
