AT-OMNI-232 *** Discontinued ***

AT-OMNI-232s_1600x742

AT-OMNI-232 *** Discontinued ***

AT-OMNI-232

  • Dual-channel Dante audio bridge
  • Two balanced mic/line inputs
  • Selectable 24 volt phantom power for each input
  • Two balanced line level outputs
  • Selectable input and output gain settings
  • Local or PoE (Power over Ethernet) powering
SKU: AT-OMNI-232 Category: Tags: ,

NOTE: The AT-OMNI-232 is discontinued.

omnistream-dante-ip-bridge

Simplify audio over IP with Dante.

The OmniStream 232 lets you integrate microphones and other sources using Audinate Dante, the AV industry’s most popular audio over IP technology. You can also incorporate a growing number of professional audio devices with Dante built-in.

Ideal for facility audio distribution systems.

The OmniStream 232 is the ideal bridge into facility-wide Dante audio systems for conferencing, presentations, paging, and background music. When paired with an OmniStream VC-2 decoder, you can bring in de-embedded audio from an HDMI source, or embed Dante audio for a display.

av-over-ip_omnistream
meeting-room-omnistream_av-over-ip

Compact and discreet.

The small, slim enclosure makes this device perfect for installation below a conferencing table, in a rack or credenza, or behind a display. You can place the OmniStream 232 anywhere audio integration may be needed.

Audio
In/Out Dante two-channel
Input Level +4 dBu nominal, +24 dBu no clipping
Output level +4 dBu nominal, +24 dBu no clipping
Frequency Response 20 Hz to 20 kHz ±5 dB
Sampling Rate 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Input Impedance > 1.8 kΩ
Phantom Power +24 V
Noise THD+N: < 0.015% from 20 Hz to 20 kHz @ 45 dB gain
SNR: > 90 dB, unweighted
Connectors
ETHERNET* 1 – RJ45, 10/100/1000 Mbps
LINE/MIC IN 2 – Euroblock, 3-pin, port 1/port 2
LINE OUT 2 – Euroblock, 3-pin, port 1/port 2
DC 24V 1 – 3.5 mm barrel connector
Power
Consumption 3 W
External Power Supply (optional) Input: 110 – 220 V AC, 50/60 Hz
Output: 24 V DC, 2.5 A
Safety CE, FCC, cULus, RoHS, CCC, RCM
Environmental
Operating Temperature +32 to +104 °F
0 to +40 °C
Storage Temperature -4 to +140 °F
-20 to +60 °C
Operating Humidity (RH) 20% to 95%, non-condensing
Chassis
Dimensions (H x W x D) 1.06 in x 6.46 in x 3.46 in
27 mm x 164 mm x 88 mm
Weight 0.82 lbs
0.37 kg
Safety CE, FCC

* Maximum distance per hop 330 ft (100 m), depending upon network configuration.


Documentation

pdf-icon Datasheet
pdf-icon Installation Guide
pdf-icon Manual
pdf-icon API

Declaration of Conformity

pdf-icon AT-OMNI-232

CAD File

cad-icon-(1) AT-OMNI-232

Literature

pdf-icon OmniStream R-Type Design Guide
pdf-icon OmniStream Brochure
pdf-icon OmniStream White Paper

Support

excel-icon Network Assignment Planner
pdf-icon Product Engineering Document
pdf-icon OmniStream IT Deployment Guide
pdf-icon OmniStream Certified Network Switches
OmniStream FAQs
AV Over IP Glossary of Terms

Related Products

WordPress Tables Plugin

Similar Products

WordPress Tables Plugin

Atlona Velocity Atlona’s IP-based AV control and management
Date 06.25.18
Overview

NOTE: The AT-OMNI-232 is discontinued.

omnistream-dante-ip-bridge

Simplify audio over IP with Dante.

The OmniStream 232 lets you integrate microphones and other sources using Audinate Dante, the AV industry’s most popular audio over IP technology. You can also incorporate a growing number of professional audio devices with Dante built-in.

Ideal for facility audio distribution systems.

The OmniStream 232 is the ideal bridge into facility-wide Dante audio systems for conferencing, presentations, paging, and background music. When paired with an OmniStream VC-2 decoder, you can bring in de-embedded audio from an HDMI source, or embed Dante audio for a display.

av-over-ip_omnistream
meeting-room-omnistream_av-over-ip

Compact and discreet.

The small, slim enclosure makes this device perfect for installation below a conferencing table, in a rack or credenza, or behind a display. You can place the OmniStream 232 anywhere audio integration may be needed.

Specifications
Audio
In/Out Dante two-channel
Input Level +4 dBu nominal, +24 dBu no clipping
Output level +4 dBu nominal, +24 dBu no clipping
Frequency Response 20 Hz to 20 kHz ±5 dB
Sampling Rate 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Input Impedance > 1.8 kΩ
Phantom Power +24 V
Noise THD+N: < 0.015% from 20 Hz to 20 kHz @ 45 dB gain
SNR: > 90 dB, unweighted
Connectors
ETHERNET* 1 – RJ45, 10/100/1000 Mbps
LINE/MIC IN 2 – Euroblock, 3-pin, port 1/port 2
LINE OUT 2 – Euroblock, 3-pin, port 1/port 2
DC 24V 1 – 3.5 mm barrel connector
Power
Consumption 3 W
External Power Supply (optional) Input: 110 – 220 V AC, 50/60 Hz
Output: 24 V DC, 2.5 A
Safety CE, FCC, cULus, RoHS, CCC, RCM
Environmental
Operating Temperature +32 to +104 °F
0 to +40 °C
Storage Temperature -4 to +140 °F
-20 to +60 °C
Operating Humidity (RH) 20% to 95%, non-condensing
Chassis
Dimensions (H x W x D) 1.06 in x 6.46 in x 3.46 in
27 mm x 164 mm x 88 mm
Weight 0.82 lbs
0.37 kg
Safety CE, FCC

* Maximum distance per hop 330 ft (100 m), depending upon network configuration.

Diagrams

Resources

Documentation

pdf-icon Datasheet
pdf-icon Installation Guide
pdf-icon Manual
pdf-icon API

Declaration of Conformity

pdf-icon AT-OMNI-232

CAD File

cad-icon-(1) AT-OMNI-232

Literature

pdf-icon OmniStream R-Type Design Guide
pdf-icon OmniStream Brochure
pdf-icon OmniStream White Paper

Support

excel-icon Network Assignment Planner
pdf-icon Product Engineering Document
pdf-icon OmniStream IT Deployment Guide
pdf-icon OmniStream Certified Network Switches
OmniStream FAQs
AV Over IP Glossary of Terms
Related Products

Related Products

WordPress Tables Plugin

Similar Products

WordPress Tables Plugin
Control Drivers

Atlona Velocity Atlona’s IP-based AV control and management
Date 06.25.18

Learn More

The Atlona OmniStream™ 232 (AT-OMNI-232) is a Dante networked audio interface that transmits and receives two channels of audio over a network. Part of the OmniStream Audio Series, OmniStream 232 devices are ideal for integrating microphones and other audio sources with a Dante-equipped DSP and OmniStream AV decoders. The OmniStream 232 features two balanced mic/line audio inputs with selectable 24-volt phantom power, as well as two balanced line level outputs. It can be powered over the network though Power over Ethernet (PoE), as well as from local AC power. The OmniStream 232 extends the power and flexibility of the OmniStream networked AV platform, by enabling facility-wide system designs that include complete audio system integration with Dante-based professional audio devices.

Easy to Configure, Simple to Manage

OmniStream AV over IP systems are remarkably easy to set up and manage – whether for a meeting room, residence, divisible room, or an entire university campus. Atlona Management System (AMS) 2.0 features automatic network device discovery, plus an intuitive web-based GUI that lets you configure virtual routing for AV, control, and data over the network – just as easily as you would with conventional AV matrix switching. AMS also streamlines and simplifies management of OmniStream systems through continuous system monitoring, notifications and alerts, event logging, multi-device configuration and backup, automated firmware updates, remote device control, and more.

Dante audio networking

The OmniStream 232 integrates audio with data networks using Audinate Dante, a popular audio networking technology widely used in the commercial AV and professional audio industries. For facilities with conference or meeting rooms, it is ideal for integrating microphones onto the network for processing by a Dante-enabled DSP, or incorporating into a larger Dante audio system for applications such as paging, recording, or sharing microphone resources between rooms. Additionally, this audio interface works with an OmniStream AV decoder for processing de-embedded audio streamed over the network, and embedding Dante audio for playback through a display. (Note: Dante audio over IP routing configuration requires Dante Controller software.)


Product Compatibility

The OmniStream 232 is compatible with the OmniStream 121 and OmniStream 122 decoders as an interface between OmniStream VC-2 streams and Dante audio streams. It is also compatible with third-party Dante networked audio devices for inclusion in networked audio systems.

Applications

  • Meeting rooms and similar spaces with several microphones – OmniStream 232 units can be used to integrate mic audio into a DSP over a Dante network.
  • Enterprises and other large organizations – In such environments, there is often a need for complete AV system solutions that include professional-quality audio for conferencing and sound reinforcement. (See this featured application as an example.)
  • Facilities in which Dante audio systems are already in place, or are being planned – OmniStream makes it easy and convenient to tie in HDMI source audio, and also bring facility-wide background music and paging into AV systems.

Atlona AV Over IP Certification

Atlona is pleased to offer Atlona AV Over IP Certification through free, InfoComm-certified and accredited online education courses. With AV Over IP Certification, you’ll have the credibility, knowledge, and confidence to inform your customers on the ideal networked AV system solutions for their requirements, and deliver quality sales and technical support whenever necessary.

Being certified by Atlona gives you priority and key advantages in selling and supporting OmniStream systems. For more information, please contact your Atlona sales representative.


Features

Dual-channel Dante networked audio interface

  • Expand the capabilities of OmniStream networked AV systems by integrating audio devices and digital signal processing*
  • Allows a unified AV-over-IP platform for facility or enterprise-wide audio and video distribution
  • * The OmniStream 232 uses the Dante networked audio protocol, and operates independently from VC-2 streams and OmniStream AV encoders and decoders. Dante audio over IP routing configuration requires Dante Controller software.

Two balanced mic/line inputs

  • Provide a localized audio connection for microphones, or de-embedded audio from an OmniStream AV decoder
  • Avoids the need to run long mic cables to an equipment rack

Selectable 24 volt phantom power for each input

  • Delivers the appropriate power necessary for a condenser microphone
  • Ensures compatibility with the wide range of popular phantom-powered microphones used in pro AV systems

Two balanced line level outputs

  • Deliver Dante audio to an OmniStream AV decoder for embedding onto an HDMI output, or send to a local sound reinforcement system
  • Enables flexible system design options for audio playback in a facility

Selectable input and output gain settings

  • Set up for mic and program audio reference levels, as well as interfacing with pro or consumer audio equipment
  • Simple built-in controls for setting proper audio gain structure and delivering quality performance

Supports industry-standard, network security features and protocols

  • HTTPS, Telnet, SSH, WebSockets with TLS, and AES-128 encryption.


Simplify integration with plug-and-play network switch compatibility

  • Streamline system setup by using Atlona Certified Switch configurations for popular models from Cisco, Pakedge, and others
  • Saves installation time and costs without the need to manually configure a network switch

Local or PoE (Power over Ethernet) powering

  • Device can conveniently be powered over the network from a PoE-equipped network switch
  • PoE simplifies integration without the need for local AC power, and allows centralized power monitoring and management
  • Optional AT-PS-241-NL power supply available

Easy to configure and manage with AMS (Atlona Management System)

  • Intuitive, web-based GUI for setting up OmniStream systems, including virtual routing for AV*, control, and data over the network
  • Simplify OmniStream system management with continuous monitoring, notifications and alerts, multi-device configuration and backup, automated firmware updates, and more
  • Available as a cost-effective server appliance, or a free software download

Product Warranty

Related Products