1×3 Atlona Component with Analog and Digital Audio Distribution Amplifier.
The 1×3 Component w/Audio Distribution Amplifier is the perfect solution for anyone who needs to send one source of high definition component video with Audio to multiple displays at the same time. It supports all component sources and displays. Supported resolutions: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p. The AT-COMP13A is capable to send signal from one source to all 3 displays at the same time without signal degradation. The 1×3 Splitter will support long cable runs up to100ft ( 30M ).
Note: OPTIONALPOWER OVER USB SOLUTION NOW AVAILABLE FOR THIS ITEM!! AT-PWUSB
- Accepts one component w/audio input and splits the input to 3 identical and buffered outputs
- Resolutions supported: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p
- High bandwidth performance-480MHz bandwidth at-3dB
- Supports SD (composite, YCbCr) and HDTV (YPbPr, RGsB) input signal
- Plug and Play
- Video Input: YPbPr x1 or RGsB x1 (or RGBHV), or composite x3 1 Vp-p@ 75 ohm
- Video Output: YPbPr x3, or RGsB(or RGBHV) x3, or composite 3×3
- Audio input: Coaxial (S/PDIF) x 1 + R/L x 1
- Audio output: Coaxial (S/PDIF) x 3 + R/L x 3
- Analog audio input/output: Audio 2 Vrms max 47k ohm.
- Horizontal/Vertical sync 5Vp-p max and H frequency 10KHz~100KHz, V frequency 20Hz~200Hz.
- Video Bandwidth: 480MHz (-3dB)
- Video System: NTSC or Pal compatible
- Resolution: up to 1080p
- Differential gain: 0.05%
- Differential phase: 0.05 degree
- Power Supply: 5V 2A~1A
- Dimensions: 5.5″W x 1.5″H x 4.1″D
- Shipping Weight: 3Lbs.
- 1×3 Component w/audio Splitter
- One 6 foot Component cable
- 5V Universal Power Supply ( 110/220V )