AT-HDVS-200-RX Firmware

Firmware AT-HDVS-200-RX Firmware Version 2.1.02
File Size 633 KB
Date 06.11.20

Note: Atlona strongly recommends firmware updates using the Atlona Management System (AMS) or the unit’s web GUI. Firmware can also be updated via USB from a PC with Windows 7, or a Mac running Windows 7 in Bootcamp.

AMS allows management and automation of firmware updates for multiple Atlona IP-controllable products in an AV installation. With AMS, you can push new firmware to several devices at once, and also schedule updates at a convenient date and time.

Release Notes

Version 2.1.02

Features

  • Hostname added to network settings and system network info page.
  • System status API call [System sta] hostname added.
  • Integrated AT-UHD-CLSO-612ED:
    • Hardware buttons.
    • Display control.

Bug Fixes

  • Fixed an issue where the OSD was not displayed unless an active input was selected.
  • Fixed an issue where input selection through the API was not consistent with TX.

Known Issues

  • Changing the color option in the OSD does not function.
Previous Releases
Version 2.0.36

Bug Fixes

  • AT-HDVS-200-TX no longer locks up on wake from standby, when connected to a Samsung UHD Blu-ray player.
  • The default output resolution has been changed from 720p to Native.

Known Issues

  • Changing the color option, in the OSD, does not function.
  • OSD is not displayed if the AT-HDVS-200-RX is switched to an inactive input.
Version 2.0.34

Features

  • Added compatibility with the AT-HDVS-210H-TX-WP and AT-HDVS-210U-TX-WP.
  • Added scaler ability to change the video aspect ratio to LetterBox (Top). LetterBox (Top) is similar to the letterbox format, except that the image will begin at the top of the screen instead of the center.
  • Added the ability to momentarily pulse the relays instead of using a constant latch. Use the RelayPulseTime y command, where y is 1-30 seconds.

Bug Fixes

  • Routing an HDCP source to a non-HDCP sink device no longer results in a black/blank image. Image is now displayed correctly, as “scrambled”.
  • Changing “Follow Display Status” to Manual, within the web GUI, no longer disables the Relay 2 toggle switch.
  • Fixed an issue where if the source was connected during the lamp cool down period, the system would turn on.
  • Updated the help description for RS232zone as follows:
    • RS232zone: RS232zone[Y], Y is the command sent to the RS232-1 port.
  • Units no longer revert to DHCP mode when using a static IP address.
  • Fixed an issue where there was a delay of 1 – 2 seconds from the analog audio output.

Known Issues

  • The RS232zone command has compatibility issues with other Atlona devices such as the CLSO-series and HDVS-series. The workaround is to connect directly to the HDVS-200-RX using the IP protocol and issue the RS232zone command.
Version 2.0.00

Features

  • While in kitmode, the output volume can be controlled from the HDVS-200-RX.
  • Added mDNS functionality.

Bug Fixes

  • Improved integrity of video output over long durations (< 24 hours).
  • Modification of the root account, by the root user, no longer causes login problems.
  • Fixed an issue where the unit would not send the hex character $08.
  • Resolved issue where power-cycling some displays could cause loss of audio on the display.
  • Improved the reliability of the TrigRS232 and TrigCEC command.
  • DHCP lease time now functions correctly.
  • Resolved an issue where sending an input command, while in kitmode, could cause the unit to lock up.
Version 1.1.09

Bug Fixes

  • Now correctly changes the resolution of the output to the HDVS-200-TX’s EDID when Input is selected.
  • Unit no longer loses audio on reboot while connected to an AT-UHD-SW-5000ED.
  • Now correctly passes RS-232 commands when connected to an AT-UHD-EX-100CE-TX.
  • Pressing display on/off on the HDVS-150-TX no longer crashes the 200-RX.
  • RX OSD now shows on the display when connected to an HDBaseT transmitter.
Version 1.0.32

Bug Fixes

  • Resolved volume control issue with HDVS-150-TX.
  • CEC now functions correctly.
Version 1.0.16

Features

  • Added HDVS sta command.

Bug Fixes

  • Improved IP communication to device.
  • Changed the default baud rate of the RS232 ports to 115200 for standardization.
  • Relay is now controlled properly over IP.
  • Resolved issue changing the parity via CLI.
  • Now correctly pulls the resolution from the input device (when used with HDVS-200-TX) when using the ‘Input’ option in the webGUI ‘s video page.
Version 1
  • Factory firmware