at-uhd-sw-5000eds-web4

4K/UHD Five-Input HDMI Switcher with Two HDBaseT Inputs and Mirrored HDMI / HDBaseT Outputs

Model Number: AT-UHD-SW-5000ED

  • Two, Ethernet-enabled HDBaseT™ Inputs
  • Mirrored, dual outputs on HDMI® and HDBaseT
  • Automatic display control using Consumer Electronics Control (CEC)*, IP, and RS-232
  • Automatic input selection using video detection technology 
  • Ethernet-enabled HDBaseT
  • IR, RS-232, and Ethernet HDBaseT insertion 
  • EDID and HDCP management 
work_with_ams featured_solution2

This product is designed to work with AMS. Please see AT-SW-AMS for more information.


4K/UHD 5-Input HDMI Switcher with Two HDBaseT Inputs and Mirrored HDMI / HDBaseT Outputs 

The Atlona AT-UHD-SW-5000ED is a 5 x 1 switcher with two HDBaseT inputs, three HDMI inputs, mirrored HDMI and HDBaseT outputs, balanced audio outputs, automatic input selection, and automatic display control capability. The HDBaseT inputs match perfectly with the HDVS-200-TX modules to enable VGA and HDMI sources to be easily integrated into a system. The switcher supports 4K/UHD @ 60 Hz, 4:2:0; (10.2 Gbps). It transmits AV signals along with Ethernet, power, and control over a single cable to displays up to 328 feet (100 meters) from the switcher. Control options include automatic input selection, front-panel buttons, and compatibility with IR, RS-232, or TCP/IP-based control systems. Displays are automatically turned on and off using CEC, IP, or RS-232.

The AT-UHD-SW-5000ED enables two HDVS transmitters to be used in a single system. With Ethernet enabled HDBaseT transmission to the HDVS transmitters and the receiver control, setup and maintenance is simplified. Automatic input selection and display control simplify the system, reducing cost, reducing setup time and resulting in a better end user experience.

Automatic Display Control

Offering first-of-its-kind display capabilities, the AT-UHD-SW-5000ED allows display control using CEC, TCP/IP or RS-232 signals. This means that many more types of displays can be controlled, costs are reduced, and that wiring is simplified. In a commercial setting, when a switcher is integrated with a display, the AT-UHD-SW-5000ED forces the display to power on automatically when a laptop is connected. At the end of the presentation, when the presenter disconnects the laptop, the AT-UHD-SW-5000ED forces the display to power off. Ease of presenter interaction with the system and the savings incurred by auto-display shutdown provide a significant return on investment.

  • CEC – The AT-UHD-SW-5000ED features Consumer Electronics Control (CEC) providing simplified display control for a significant reduction in the cost of the display (compared to an RS-232 controlled display). CEC is a communication channel incorporated in the HDMI specification allowing connected devices to control each other.
  • TCP/IP – The TCP/IP signal can be transmitted either through an independent LAN connection or through the HDBaseT connection when connected to an AT-UHD-EX-100CE-RX  receiver which allows Ethernet over HDBaseT. The LAN port on the AT-UHD-SW-5000ED not only connects to the AT-UHD-SW-5000ED, it also extends out the HDBaseT connection through an internal hub. A connected router is required to manage IP addresses.
  • RS-232 – Many displays including projectors, commercial flat panel displays, and some consumer displays can be controlled using the RS-232 signal directly from the switcher. The scaler is able to send commands using RS-232 for automatic display control to compatible displays.  
  • FLEXIBLE, POWER BUTTON – The power button on the front panel can be set to either turn the AT-UHD-SW-5000ED on/off or it can be set to control the attached display. In addition to using the front panel power button, display on/off commands can be triggered automatically based on presence of video signals, or by a third-party control system using either TCP/IP, RS-232, or IR signals.
  • SWITCHER OR DISPLAY VOLUME CONTROL – Volume control buttons on the front panel can control either the analog audio output of the AT-UHD-SW-5000ED or they can be set to control the volume of any device that allows volume control using TCP/IP or RS-232, such as a flat panel display, DSP, or another switcher. This gives great flexibility to the system design.
  • MULTIPLE POINTS OF CONTROL – Since all these commands can be sent using TCP/IP, it becomes simple to have multiple control points in a larger system. The AT-UHD-SW-5000ED could be used as an input device for an AT-UHD-CLSO-824 and the buttons would then be able to manage a variety of functions such as “Show me” and volume.

Reliable Auto-Switching

The AT-UHD-SW-5000ED automatically selects an input source based on detection of the 5 volt hot plug detect (HPD) signal, as well as active video. This ensures reliable auto-switching operation for all video sources, including DVRs, DisplayPort / Mini DisplayPort adapters, and other devices that always maintain the HPD line at the 5 volt “high” state but may not be delivering active video.

Mirrored HDMI and HDBaseT Outputs

The AT-UHD-SW-5000ED adds 4K/UHD performance and extended distance HDBaseT transmission to Atlona’s HDMI small switcher family for a unique solution for professional integration applications. Internal HDBaseT and video distribution eliminate the need for additional system components while PoE eliminates the need for a power supply for the receiver. As an alternative, with an HDBaseT-capable display, an HDBaseT receiver isn’t required, reducing system complexity and saving integrators time and money.

Additional Features

Advanced features also include a web-based GUI for easy set-up and management of EDID, HDCP, and display control. The switcher offers audio de-embedding of PCM audio over HDMI to two-channel, balanced +4 dBu analog audio outputs. The switcher is a cost-effective product for professional integration featuring a compact, 1U, half-rack width enclosure that is easily installed with included 19” rack-mount brackets. Two units can be mounted side-by-side.

Optional Scaler for VGA Signals

If VGA inputs are required with the AT-UHD-SW-5000ED, we recommend the AT-HD-SC-500 scaler. With automatic input selection, two HDMI inputs and a VGA input it brings scaling to the VGA source without affecting the HDMI signals. Resolution of the HDMI signals can be controlled using the EDID settings on the AT-UHD-SW-5000ED.

The AT-UHD-SW-5000ED also supports the Atlona Management System (AMS), a powerful network software platform that integrates product configuration, management and updating. Specially designed for IP-controllable Atlona Products, the Atlona Management System reduces installation time and enables remote monitoring and support. To learn more please visit AT-SW-AMS.

The AT-UHD-SW-5000ED is ideal for:

  • Presentations given from a lectern and a conference table or from a two locations at a large conference table requiring dual HDVS transmitters
  • Automatic input selection and display control are required within a conference or classroom to avoid complicated control systems
  • An easy-to-integrate, rack mounted HDBaseT switcher is needed to provide cost savings associated with routing audio, video, control, Ethernet, and power a long distance over a single category cable from the equipment rack

*Consumer Electronics Control (CEC):  Atlona does not guarantee the function of CEC with all televisions. We can confirm proper operation with many current Samsung, Panasonic, and Sony TVs. Many manufacturers do not support the CEC “off” command when sent from a source and older TVs use proprietary commands. Atlona only supports those TVs that follow CEC command structure from HDMI 1.2a and support the “off” command when issued by a source. We encourage any dealer to get evaluation product from Atlona prior to designing a system around this control technology or be prepared to use other methods to control their displays if Atlona CEC is not compatible with the installed displays.

Configured and Managed by AMS

The AT-UHD-SW-5000ED also supports the Atlona Management System (AMS), a powerful network software platform that integrates product configuration, management and updating. Specially designed for IP-controllable Atlona Products, the Atlona Management System reduces installation time and enables remote monitoring and support. To learn more please visit AT-SW-AMS.

Features

Two, Ethernet-enabled HDBaseT Inputs 

  • Supports two HDVS-150 or HDVS-200 Series transmitters for placement at remote sources near lecterns, conference tables, and instructor’s desks
  • Simplifies integration of remote sources by eliminating power supplies when used with PoE-powered transmitters; single category cable carries AV signals, control and power

 Mirrored, dual outputs on HDMI and HDBaseT

  • Supports dual display environments with local and extended distance 328 foot (100 meter) displays
  • Eliminates cost associated with extra extension components; simplifies installation. HDMI output can be used with additional HDBaseT transmitter

Automatic display control 

  • Automatically changes projector power state based on active or standby mode of switcher. Control signals transmitted via CEC, IP, or RS-232
  • Eliminates need for complex control system in AV systems. Enables display and volume control directly. CEC enables control of low-cost consumer displays
  • Any product that has mirrored output with HDMI and HDBaseT will have CEC functionality through the HDBaseT output  

Automatic input selection using hot plug detect and video detection technology

  • Selects active input when sources are connected or if there is a change in source power status
  • Eliminates need for complex control system in AV systems

Ethernet-enabled HDBaseT 

  • Simplifies installation, maintenance with IP controlled switcher, transmitters and receivers using Atlona AMS
  • Configure, backup, update, maintain and monitor from a simple PC interface

IR, RS-232 and Ethernet HDBaseT insertion

  • Adds internally-generated or externally-generated display control signals to the HDBaseT transmission
  • Simplifies display control from third-party control systems

EDID management and HDCP management 

  • Manages EDID communications between source and display; allows integrators to force sources to preferred resolution
  • Ensures desired audio formats and video resolutions are provided to the AV system; enables PC output to non-compliant codecs

4K/UHD capability

  • Compatible with Ultra High Definition sources and displays
  • Supports high-resolution applications such as CAD, desktop publishing, and detailed financial reporting
  • Supports up to HDCP 1.4 (Does not support HDCP 2.2 devices)

AV, Ethernet, power and control over HDBaseT

  • Delivers 4K/UHD video, audio, 100Base-T Ethernet, power and control through a single cable
  • Eliminates multiple cable runs between source, control system router and display

Power over Ethernet for remote-powered HDBaseT receivers

  • Industry standard IEEE 802.3af PoE supplied by the switcher over HDBaseT
  • No local AC outlet required; saves time and integration costs

TCP/IP, RS-232, and IR control

  • Flexible control options compatible with 3rd-party control systems
  • Reduces integration time and costs

Easy, GUI-based configuration using integrated web server

  • Offers menu-based configuration of network settings, RS-232 settings, input switching, EDID, and HDCP management and audio
  • Allows fast configuration of internal product settings and troubleshooting from a tablet, smart phone, or PC in the field

Volume controls

  • Volume up and volume down button adjust output level to sound system
  • Alternatively send RS-232 or TCP/IP commands to external control device

Volume setting indicator

  • Displays volume level of the switcher
  • Provides quick indication of level during setup

Balanced, line level output

  • Reduces noise and requirement for external components
  • Matches requirements of commercial sound systems

Multi-channel audio compliant

  • Supports PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, and DTS-HD Master Audio™
  • Allows any multi-channel audio stream to be used within a professional audio system 
  • Note:  Only PCM sources are de-embedded and routed by the AT-UHD-SW-5000ED

Rack-mountable, 1U, half rack width enclosure

  • Installs easily in rack-mounted systems with included 19” rack-mount brackets
  • Simplifies installations; allows two units to be mounted together

Works with AMS

  • This IP-controllable product can be remotely managed by the Atlona Management System software
  • Integrates product configuration, management, and updates to reduce installation time and enable remote support

Included accessories

  • User guide, desktop power supply, detachable power cable, IR hand held remote control, rack mount bracket kit

Award-winning 10 year limited product warranty

  • Ensures long-term product reliability and performance in residential and commercial systems
  • Specify, purchase, and install with confidence

 

AT-UHD-SW-5000ED Product Introduction

AT-UHD-SW-5000ED Applications

Resolution
Video 4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i
VESA 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480
Color Space YUV, RGB
Chroma Subsampling 4:4:4, 4:2:2, 4:2:0*
Color Depth 8-bit, 10-bit, 12-bit
Audio
Analog PCM 2Ch (de-embedded)
HDMI IN & HDBaseT OUT PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
Sample Rate 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit Rate up to 24-bit
Distance
CAT5e/6 @ 4K up to 70 meters up to 230 feet
CAT5e/6 @ 1080p up to 100 meters up to 328 feet
CAT6a/7 @ 4K up to 100 meters up to 328 feet
HDMI IN/OUT @ 4K up to 5 meters up to 15 feet
HDMI IN/OUT @ 1080p up to 10 meters up to 30 feet
Signal
Bandwidth 10.2 Gbps
CEC Compliant
HDCP Switchable – Compliant/Non-compliant – 1.4
Temperature
Operating 0°C to 50°C 32°F to 122°F
Storage -20°C to 60°C -4°F to 140°F
Humidity 20 to 90% non-condensing
Power
Consumption 44.22W
Idle Consumption 22W
Supply Input: AC100-240V ~ 50/60Hz
Output: 48V/3.125A
Dimension
H x W x D 44 x 222.25 x 261 (mm) 1.73 x 8.75 x 10.28 (inch)
Weight
Unit 1.66 kg 3.70 lbs
Certification
Unit CE, FCC
Power Supply CE, FCC, Level VI, RoHS, cULus, RCM, CCC

*4096×2160@50/60Hz & 3840×2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only

AT-UHD-SW-5000ED Diagram

Documentation

pdf-icon Datasheet
pdf-icon Manual
pdf-icon Product Engineering Document

Diagrams, Drawings & CAD Files

cad-icon-(1) CAD Files

Declarations Of Conformity

pdf-icon Declarations Of Conformity

Related Products

AT-ANC-108D 8-Button Network Control Panel

The AT-UHD-SW-5000ED can be used with a wide variety of Atlona HDBaseT transmitters and receivers.

AT-HDVS-200-TX Three-Input Switcher for HDMI and VGA Sources with Ethernet-Enabled HDBaseT Output
AT-HDVS-200-TX-WP Two-Input Wall Plate Switcher for HDMI and VGA Sources with Ethernet-Enabled HDBaseT Output
AT-HDVS-200-RX Ethernet-Enabled HDBaseT Scaler with HDMI and Analog Audio Outputs
AT-UHD-EX-100CE-TX-PD 4K/UHD Remote Powered HDMI Over 100M HDBaseT Transmitter with Ethernet, Control and PoE
AT-UHD-EX-100CE-RX 4K/UHD HDMI Over 100M HDBaseT Receiver with Ethernet, Control and PoE
AT-UHD-EX-100CE-KIT 4K/UHD HDMI Over 100M HDBaseT TX/RX with Ethernet, Control and PoE
AT-UHD-EX-70C-RX 4K/UHD HDMI Over HDBaseT Receiver with Control and PoE
AT-UHD-EX-70C-KIT 4K/UHD HDMI Over HDBaseT TX/RX with Control and PoE
AT-UHD-EX-70-KIT 4K/UHD HDMI Over HDBaseT TX/RX with PoE

Similar Products

AT-UHD-SW-51 4K/UHD Five-Input HDMI Switcher
AT-UHD-SW-52 4K/UHD Five-Input HDMI Switcher with Mirrored HDMI Outputs
AT-UHD-SW-52ED 4K/UHD Five-Input HDMI Switcher with Mirrored HDMI and HDBaseT Outputs
AT-UHD-CLSO-601 4K/UHD Six-Input Multi-Format Switcher with Mirrored HDMI and HDBaseT Outputs
AT-UHD-CLSO-612ED 4K/UHD Six-Input Multi-Format Switcher with Mirrored HDMI and HDBaseT Outputs
AT-UHD-CLSO-824 4K/UHD 8×2 Multi-Format Matrix Switcher with Dual, HDBaseT and Mirrored HDMI Outputs

AT-UHD-SW-5000ED Firmware

Firmware Version 1.0.0
Revision A
File Size 571 KB
Date 06.24.16

Update includes:

  • Factory Firmware

Note: Atlona strongly recommends firmware updates using the Atlona Management System (AMS) or the unit’s web GUI. Firmware can also be updated via USB from a PC with Windows 7, or a Mac running Windows 7 in Bootcamp.

AMS allows management and automation of firmware updates for multiple Atlona IP-controllable products in an AV installation. With AMS, you can push new firmware to several devices at once, and also schedule updates at a convenient date and time.

Crestron RS-232 and TCP/IP Control
File Size 1016 KB
Date 10.18.16
[/su_Table]

Neets RS-232 and IP
File Size 5 KB
Date 02.27.17

Click below for Support details

4K/UHD Five-Input HDMI Switcher with Two HDBaseT Inputs and Mirrored HDMI / HDBaseT Outputs