at-uhd-ex-100ce-kit-web4

4K/UHD HDMI Over 100M HDBaseT TX/RX with Ethernet, Control and PoE

Model Number: AT-UHD-EX-100CE-KIT

  • 4K/UHD capability
  • HDCP 2.2 compliant
  • Remote-powered receiver
  • Extended distance HDMI extension
  • AV, Ethernet, power, and control over HDBaseT
  • Rear panel I/O connectors
  • Multi-channel audio compliant

 


4K/UHD HDMI Over 100M HDBaseT TX/RX with Control and PoE

4K/UHD HDMI Over 100M HDBaseT TX/RX with Control and PoE

The Atlona AT-UHD-EX-100CE-KIT is an HDBaseT™ transmitter/receiver kit for HDMI transmission up to 328 feet (100 meters) over category cable with Ethernet pass through, RS-232 and IR control, plus Power over Ethernet. This extender kit transmits video signals up to 4K/UHD @ 60Hz with embedded multi-channel audio and remote 48V power for the receiver. Additionally, the kit extends Ethernet, RS-232, and 12 volt-based IR control commands. The kit is HDCP 2.2 compliant and supports EDID communication. Both transmitter and receiver feature quarter rack width metal enclosures for easy rack mounting with rear panel I/O ports for uncluttered wire management.  Use with an optional AT-IR-CS-RX IR receiver cable to capture IR remote commands for AV system control.

Features

4K/UHD capability

  • Compatible with Ultra High Definition sources and displays
  • Full support of 4K/UHD streaming services and playback devices

HDCP 2.2 compliant

  • Adheres to latest specification for High-bandwidth Digital Content Protection
  • Allows protected content stream to pass between devices

Remote-powered receiver

  • Industry standard IEEE 802.3af PoE for receiver is supplied by transmitter over HDBaseT
  • Saves time and integration costs

Extended distance HDMI extension

  • Transmits HDMI signals up to 328 ft (100m) @ 1080P with CAT5e/6 or 4K/UHD using CAT6a/7 cable
  • Uses easy-to-integrate category cable for low-cost, reliable system installation

AV, Ethernet, power, and control over HDBaseT

  • Delivers 4K/UHD video, audio, 100Base-T Ethernet, power, and control through a single cable
  • Eliminates multiple cable runs between source, control system, router, and display

Rear panel I/O connectors

  • Placement of ports on rear panel simplifies wire management
  • Saves installation time and eliminates clutter

Multi-channel audio compliant

  • Supports PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, DTS:X™
  • Allows any multi-channel audio stream to be used within a professional audio system

Field updatable firmware

  • Front panel USB port provides an easy means for kit upgrades
  • Ensures long term system return on investment

Front panel Power and Link status LEDs

  • LED indicators provide power and HDBaseT link status information
  • Provides easy setup and troubleshooting

Power Chaining

  • Included power supply provides ample power for up to three Atlona UHD-EX Series extender kits
  • Four Atlona UHD-EX Series extender kits may be powered using an optional power supply, p/n AT-PS-483125-C
  • Reduces clutter from multiple power supplies in equipment racks; see manual for full details

Low-profile, 1 inch (2.5 cm) high quarter rack-width enclosure

  • Easy installation into racks and confined spaces behind displays
  • Keeps devices out-of-sight when placed in public spaces

 Included accessories

  • User guide, desktop power supply for transmitter, detachable power cable, IR emitter P/N AT-IR-CS-TX, mounting brackets

Award-winning 10 year limited product warranty

  • Ensures long-term product reliability and performance in residential and commercial systems
  • Specify, purchase, and install with confidence

4K/UHD Transmission with Ethernet, Control, and PoE

The AT-UHD-EX-100CE-KIT provides integrator-friendly features including: IEEE standards based PoE transmission for safety and compatibility; compliant with HDCP 2.2 to meet the latest copy protection requirements; an integrator-friendly form factor with rear panel HDBaseT, HDMI, control and power connections; a rack- mountable form factor that allows for four transmitters to share a single, 1U rack tray; power chaining to allow multiple sets to be powered from one power supply; and a front mounted USB port for easy firmware updates.

The AT-UHD-EX-100CE-KIT is ideal for use in residential or commercial point to point applications that require greater HDBaseT signal transmission distance than the AT-UHD-EX- 70C can support. As a transmitter/receiver pair, the kit can be used with the H2H matrix switcher and HDDA distribution amplifier series and third party control systems for long distance AV signal and control extension with PoE capability. On its own, the AT-UHD-EX-100CE-RX receiver is compatible with the UHD-PRO3 Series, AT-UHD-CLSO-601 and AT-UHD-SW-52ED.

Resolution
Video 4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i
VESA 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480
Colorspace YCbCr, RGB
Chroma Subsampling 4:4:4, 4:2:2, 4:2:0
Color Depth 8-bit, 10-bit, 12-bit
Audio
Formats PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
Sample Rate 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit Rate up to 24-bit
Distance
CAT5e/6 @ 4K up to 70 meters up to 230 feet
CAT6a/7 @ 4K up to 100 meters up to 328 feet
CAT5e/6 @ 1080p up to 100 meters up to 328 feet
HDMI IN/OUT @ 4K up to 5 meters up to 15 feet
HDMI IN/OUT @ 1080p up to 10 meters up to 30 feet
Signal
Bandwidth 10.2 Gbps
CEC Pass through
HDCP Supports up to 2.2
Connector
Firmware Mini-B USB
HDBaseT RJ45 (8P8C)
HDMI Type A
LAN RJ45 (8P8C), Ethernet pass through
TX-IR 4-pin captive screw
RX-IR 5-pin captive screw
RS-232 3-pin captive screw
Power 2-pin, 48V captive screw
Temperature
Operating 0°C to 50°C 32°F to 122°F
Storage -20°C to 60°C -4°F to 140°F
Humidity 20 to 90% non-condensing
Power
Consumption 12W
Supply Input: AC100~240V 50/60Hz
Output: DC 48V/0.83A
Dimension
H x W x D 25 x 109 x 89 (mm) 0.98 x 4.29 x 3.50 (inch)
w/ears 27 x 119 x 89 (mm) 1.06 x 4.69 x 3.50 (inch)
Weight
Unit 0.39kg 0.86lbs
Certification
Power Supply CE, FCC, RoHS, cULus, RCM, CCC
Product CE, FCC

4096×2160@50/60Hz & 3840×2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only

Applilcation-Mockups-EX-100CE

Applilcation-Mockups-100CE

Documentation

pdf-icon Datasheet
pdf-icon Manual

Diagrams, Drawings & CAD Files

cad-icon-(1) RX CAD File
cad-icon-(1) TX CAD File

Declarations Of Conformity

pdf-icon Declarations Of Conformity
AT-H2H-88M Atlona HDBaseT 8 by 8 HDMI Matrix Switcher over CAT5e/6/7
AT-H2H-44M Atlona 4 by 4 HDMI Matrix Switcher
AT-IR-CS-RX IR Receiver Cable for POE Extenders
AT-HDDA-8 Atlona 1 x 8 HDMI Distribution Amplifier

Similar Products

AT-UHD-EX-70C-KIT 4K/UHD HDMI Over HDBaseT TX/RX with Control and PoE
AT-UHD-EX-70-2PS 4K/UHD HDMI Over HDBaseT TX/RX Kit
AT-UHD-EX-70-KIT 4K/UHD HDMI Over HDBaseT TX/RX with PoE
AT-UHD-SW-52 4K/UHD 5 Input HDMI Switcher with Mirrored HDMI Outputs
AT-UHD-SW-52ED 4K/UHD 5 Input HDMI Switcher with Mirrored HDMI and HDBaseT Outputs and PoE
AT-UHD-CLSO-601 4K/UHD 6 Input Multi-Format Switcher with Mirrored HDMI and HDBaseT Outputs, PoE and Auto Switching
AT-UHD-CLSO-612 Atlona 6 Input Switcher and Scaler with HDBaseT and Mirrored HDMI Output

Click below for Support details

4K/UHD HDMI Over 100M HDBaseT TX/RX with Ethernet, Control and PoE