AT-IRX-CS ***Discontinued***

• • • Discontinued • • •

Model Number: AT-IRX-CS

The Atlona Captive Screw Ready IR Receiver provides greater distance and rejects problematic IR frequencies from sources such as: plasma, CFL, and LCD panels.



  • Frequency range from 30 to 60 kHz
  • Distance up to 10m w/no interference on axis
  • Reception Angle: +/- 45° off axis
  • Dimensions (H x W x D)
    • 10 x 62 x 10 (mm)
    • 0.39 x 2.44 x 0.39 (inch)
  • Red status LED indicator for quick verification the IR receiver is picking up the IR remote’s signal


pdf-icon Manual
pdf-icon DataSheet


Q: How do you validate whether the IR receiver module is connected correctly? A: The AT-IRX-CS has a red status LED that flashes when sensing IR transmission. If it is not connected correctly, the IR receiver LED will not flash. It also determines if an IR remote control battery has sufficient charge or not.

Related Products

AT-HDRX-IR Atlona HDBaseT Receiver over a Single Category Cable w/IR
AT-HDRX-RSNET Atlona HDBaseT RX Box for HDMI w/Ethernet, RS-232 and IR
AT-HDWP-IR Atlona HDBaseT RX HDMI 2-Gang US Decora Wall Plate w/IR
AT-HDWP-RSNET Atlona HDBaseT RX for HDMI 2-Gang US Decora Wall Plate w/ Ethernet, RS-232 and IR

Click below for Support details

AT-IRX-CS ***Discontinued***