Atlona HDBaseT RX for HDMI 2-Gang UK Wall Plate w/ Ethernet, RS-232 and IR
HDWP-RSNET-UK receiver wall plate features complete Ethernet, RS-232, and IR control compatible with all major control systems. Networks signals can be routed for native applications on a smart TV without an extra cable. For added ease of use, purchase the Atlona Link Connect Captive Screw Ready RS-232 Cable (AT-LC-CS-RS232-2M) or Atlona Link Connect Captive Screw Ready IR Cable (AT-LC-CS-IR-2M)
2-gang UK wall plate designed for in-wall installation behind your display. PoCc requires no power outlet in the wall, so you save the cost of installing power. A side-exit RJ45 improves cable routing by minimizing category cable bend radius, thus reducing the possibility of lower performance or loss of signal.
Higher Resolutions at Longer Distances
HDWP-RSNET UK receiver wall plates support HDMI resolutions up to 4K/UHD as far away as 328 feet (100 meters), the longest of all receivers that meet HDBaseT specifications.
||Video: up to 4Kx2K
VESA: up to 1920×1200
(H x W x D)
70 x 109 x 23 (mm)
||passes through up to Dolby TrueHD
or DTS-HD Master Audio
0°C to 40°C
-20°C to 60°C
||CE, FCC, RoHS, cULus for power supplies
With so many electrical back boxes it is hard to know which to purchase with any wall plate. For convenience Atlona has compiled recommended electrical boxes to use with the HDWP-RSNET-UK.
For 9.5mm up to 12.5mm walls: Red/Grey 2 Gang box or mud ring is best
For 12.5mm walls: Appleby 2 gang box or mud ring is best
Note: All electrical back boxes must be at least 30mm deep.
|• 1 x AT-HDWP-RSNET-UK
||• 2 x Captive Screw Connector (3 pin: RS-232 and 5 pin: IR)
|• 1 x IR Emitter
||• 1 x IR Receiver
|• 1 x UK wall plate
||• 2 x 30mm screws for the electrical box
|• 4 x 4mm screws for the face plate
||• 1 x User Manual
Diagrams, Drawings & CAD Files
Declarations Of Conformity