Atlona HDBaseT RX HDMI 1-Gang UK Wall Plate w/IR
Simplify installation with an attractive UK wall plate that extends 1080p HDMI and control signals up to 230 feet (70 meters); plus support for 4K/UHD. HDBaseT and power over category cable (PoCc™) allow signal and power over a single category cable with IR control. Bidirectional IR control compatible with all major control systems.
For added ease of use, purchase the Atlona Link Connect Captive Screw Ready IR Cable (AT-LC-CS-IR-2M)
1-gang UK wall plate designed for in-wall installation behind your display. PoCc requires no power outlet in the wall, so you save the cost of installing power. A side-exit RJ45 improves cable routing by minimizing category cable bend radius, thus reducing the possibility of lower performance or loss of signal.
Higher Resolutions at Longer Distances
Supports resolutions up to 1080p as far away as 230 feet (70 meters) and 4K/UHD up to 130 feet (40 meters).
||Video: up to 4Kx2K
VESA: up to 1920×1200
(H x W x D)
70 x 109 x 12(mm)
||passes through up to Dolby TrueHD
or DTS-HD Master Audio
||70M @ 1080p over CAT6a/7
60M @ 1080p over CAT5e/6
40M @ 4Kx2K
0°C to 40°C
-20°C to 60°C
||CE, FCC, RoHS, cULus for power supplies
With so many electrical back boxes it is hard to know which to purchase with any wall plate. For convenience Atlona has compiled recommended electrical boxes to use with the HDWP-RSNET-UK.
For 9.5mm up to 12.5mm walls: Red/Grey 1 Gang box or mud ring is best
For 12.5mm walls: Appleby 1 gang box or mud ring is best
Note: All electrical back boxes must be at least 30mm deep.
|• 1 x AT-HDWP-IR-UK
||• 1 x Captive Screw Connector
|• 1 x IR Emitter
||• 1 x IR Receiver
|• 4 x 4mm screws for the face plate
||• 2 x 30mm screws for the electrical box
|• 1 x User Manual