• • • Discontinued • • •

A new version of this product is available as the AT-HDVS-150-TX-WP.

Model Number: AT-HDVS-TX-WP

  • US, 2-gang wall plate
  • 2×1 HDBaseT™ switcher transmitter
  • Long distance HDMI extension
  • Auto-switching
  • Front panel Input Select button
  • Auto display control

NOTE: The AT-HDVS-TX-WP is discontinued. The AT-HDVS-150-TX-WP is the new version of this product and is part of the HDVS-150 Series. Please visit the HDVS Series overview page for more information.

HDMI and VGA/Audio to HDBaseT Switcher TX Wall Plate

HDMI and VGA/Audio to HDBaseT Switcher TX Wall Plate

The Atlona AT-HDVS-TX-WP is a 2×1 HDBaseT™ switcher transmitter for HDMI and VGA transmission with display control over category cable. It features an HDMI input plus VGA input with 3.5mm audio connector and a two-gang, US-style wall plate enclosure. The transmitter combines the benefits of a multi-format switcher with built-in auto switching and the advantages of long-distance signal extension over a single cable. AV signals up to 1080p/60Hz and 1920×1200 video with embedded multi-channel audio and control signals can be extended up to 230 feet (70 meters). Remote power for the transmitter is provided via Power over Category cable (PoCc) from an AT-HDVS-RX receiver or AT-UHD-CLSO-612 switcher. Designed for use with the AT-HDVS-RX receiver, the transmitter/receiver pair enables auto display on/off, auto-switching, 3rd-party control, and other features. The AT-HDVS-TX-WP fits inside any 40 mm deep 2-gang electrical box or mud ring and is ideal for long distance transmission and display control in corporate or educational settings using analog and digital sources. Also available as the AT-HDVS-TX-WP-UK with 2-gang UK wall plate.


US, 2-gang wall plate

  • Shallow, 1.4 in (35 mm) deep wall plate simplifies integration with top-mounted captive screw connectors
  • Attractive alternative to table top boxes for placement near presenter’s station

2×1 HDBaseT™ switcher transmitter

  • Features an HDMI and VGA input with 3.5mm audio connector
  • Allows advanced HDMI display devices to be used with legacy VGA sources

Long distance HDMI extension

  • Transmits HDMI and VGA/Audio signals up to 230 ft (70m) @ 1080p over CAT6a/7 and 197 feet (60 m) @1080p over CAT5e/6
  • Uses easy-to-integrate category cable for low-cost, reliable system installation


  • Selects active input when sources are connected or if there is a change in source power status
  • Eliminates need for complex control system in small AV systems

Front panel Input Select button

  • Overrides auto-switching when two active sources are present
  • Simple manual control allows presenter to maintain control of AV system

Auto display control

  • Automatically changes projector power state as sources are connected or removed from inputs
  • Eliminates need for complex control system in small AV systems

Front Panel Display On/Off control

  • Remotely controls display power state; provides alternate ‘Display Mute’ mode
  • Eliminates need for manual operation of display or IR remote control

Remote-powering over category cable

  • Supports Power over Category cable to receive power from receiver or AT-UHD-CLSO-612 switcher over the same category cable used for AV and control signals
  • Eliminates local AC outlet required for transmitter plus saves time and integration costs

Multi-channel audio compliant

  • Supports PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, and DTS-HD Master Audio™
  • Allows any multi-channel audio stream to be used within a professional audio system

RS-232 control

  • When used with the AT-HDVS-RX or CLSO Series switchers, input selection can be made from a 3rd party control system
  • Seamless integration with larger, control system-based AV systems

Front panel Link LEDs

  • Illuminates when receiving power/signal from compatible receivers
  • Provides easy setup and troubleshooting

Suggested receivers:

  • AT-HDVS-RX – HDBaseT to HDMI Scaler Receiver with Display Control
  • AT-UHD-CLSO-612 – 6 input multi-format switcher with HDVS compatible inputs
  • AT-PS-POCC – provides power to PoCc wall plate when used with HDBaseT input on display

Award-winning 10 Year Limited Product Warranty

  • Ensures long-term product reliability and performance in residential and commercial systems
  • Specify, purchase, and install with confidence

Analog to Digital Transition

The Atlona HDVS series was designed to smooth the transition from analog to digital displays, allowing advanced HDMI display devices to be used with legacy VGA sources. The series also adds the simplicity and performance of HDBaseT technology to eliminate multiple cable runs and signal degradation that can occur with long transmission lines. Cost-effective and easy-to-terminate category cable provides additional integrator and benefits.

The AT-HDVS-TX-WP offers auto-switching between both HDMI and VGA inputs. HDBaseT and power over category cable (PoCc™) allow the sources to be up to 230 feet (70 meters) from the display. A single category cable carries both signal, control, and power. Combined with AT-HDVS-RX, display power is easily controlled with the transmitter. Auto Display On/Off eliminates the need for a control system.

Benefits when used with AT-HDVS-RX

  • Auto display On/Off
  • Auto input switching
  • HDCP management for use with teleconference systems
  • Set preferred input resolution for both VGA and HDMI sources
  • PoCc to eliminate the power supply at the transmitter
  • Enables display control from the transmitter
  • RS-232 input selection from 3rd party controller
  • Easy to use software simplifies RS-232 programming

Integrates with CLSO Series Switchers for complex systems

The AT-HDVS-TX-WP is designed for use with the AT-UHD-CLSO-612 in rooms where multiple input zones are required. Two zones, each with an AT-HDVS-TX-WP, provide one HDMI and one VGA input auto-switched to an HDBaseT output for routing to the AT-UHD-CLSO-612 which provides power to the transmitter using PoCc to simplify system installation. This greatly expands the capability of a CLSO-based AV system.


What is Auto-Switching and why is it Important to my Application?


Atlona Academy – Extenders Best Practices


Atlona Academy – HDVS


Bandwidth 6.75Gbps Power Consumption 17.2W
Video Video: up to 1080p
VESA: up to 1920×1200
Installation Dimensions
(H x W x D)
2.46 x 3.5 x 1.38 (inch)
62.44 x 89.02 x 35 (mm)
Audio passes through up to Dolby TrueHD 
or DTS-HD Master Audio
Weight 0.73 lbs
0.33 kg
Distance 230ft @ 1080p over CAT6a/7
197ft @ 1080p over CAT5e/6

32°F to 104°F
0°C to 40°C
-4°F to 140°F
-20°C to 60°C
Wall Dimensions 2 Gang (US & UK) HDCP Compliant? Yes
Certifications CE, FCC, RoHS, cULus for power supplies

Package Includes

• 1 x AT-HDVS-TX-WP • 1 x Wall plate cover (US or UK)
• 4 x Screws (US wallplate) or 2 x Screws (UK wallplate) • 1 x User Manual


pdf-icon Manual
pdf-icon DataSheet

Diagrams, Drawings & CAD Files

cad-icon-(1) CAD Files
cad-icon-(1) CAD Files – UK Version


Q: Can I use the analog audio input + HDMI video? A: No, the analog audio input is only for the VGA input.
Q: After I push the Display On/OFF button, the light flashes and will not respond until the light stops flashing? A: There is a timer that can be set that will disable the button after being pushed for a period of time. The timer can range from 0-300 seconds (default is 0 seconds). This can be adjusted through the on screen menu under Others/ProjSW mode.


pdf-icon Download Brochure

Declarations Of Conformity

pdf-icon Declarations Of Conformity

Related Products

AT-HDVS-RX Atlona HDBaseT to HDMI Extender/Scaler
AT-UHD-CLSO-612 4K/UHD 6 Input Multi-Format Switcher with HDBaseT Inputs, Mirrored HDMI and HDBaseT Outputs, and Auto Switching
AT-PW24V2-7A-CAPT 24 Volt 2.7 Amp Captive Screw Power Supply
AT-PS-POCC Atlona Mid-Span Power Supply

Similar Products

AT-HDVS-TX Atlona Dual HDMI and VGA/Audio to HDBaseT Switcher
AT-HDVS-TX-WP-UK Atlona HDMI and VGA/Audio to HDBaseT Wall Plate

AT-HDVS-TX-WP Firmware

Before downloading either one of these drivers, please take a look at these drivers instructions. Click here for more information.

Download Firmware version 1.2.6 Download Firmware version 2.2.6
File Size 182 KB File Size 182 KB
Date 05.17.16 Date 05.17.16

Update 1.2.6 Includes:

  • Fixed audio stuttering
  • Changed audio EDID from multichannel to 2 channel
  • Added ability to toggle baud rate between 9600 and 115200
    • Press and hold ‘Display ON/OFF’ button for 7 seconds
    • When used with HDVS-RX, use RS-232 command
      ‘WP_BaudrateTx[a]$’ terminated with a carriage return;
      a = 115200 or 9600
  • Fixed RS-232 issue where commands revert to default commands
  • Fixed resolution issue with older computers

Update 2.2.6 Includes:

  • Fixed audio stuttering
  • Changed audio EDID from multichannel to 2 channel
  • Added ability to toggle baud rate between 9600 and 115200
    • Press and hold ‘Display ON/OFF’ button for 7 seconds
    • When used with HDVS-RX, use RS-232 command ‘WP_BaudrateTx[a]$’ terminated with a carriage return; a = 115200 or 9600
  • Fixed RS-232 issue where commands revert to default commands
  • Fixed resolution issue with older computers
  • Enables Windows 8.1 and Apple PC firmware upgrading
  • Firmware cannot be loaded onto products with V.1.X.X

HDVS Firmware Updates

Download All HDVS Models Firmware, Software and Instructions in one file Download HDVS Updates Now

The AT-HDVS system features two sets of primary versions. Prefix 2.x.x units can be updated with MAC or windows 8 machines while prefix 1.x.x can be updated with Windows 7 machines or below.

Your HDVS unit comes with an alphanumeric serial sticker behind the unit. The last 3 digits show what factory firmware you have. If you a 2.x.x unit; then you can upgrade to a higher 2.x.x FW. If you have a 1.x.x unit, then you can only upgrade to a higher 1.x.x FW. Please make sure to upload the correct firmware for each unit as not doing so can cause errors.

Note: For AT-HDVS-TX-WP only, a batch had a misprint of “3052” on the alphanumeric tag, if you have this, then it indicates you are on “210” firmware.

AT-HDVS-TX-WP Downloads

Download Control Software Version 2.2.4
File Size 6.3 MB
Date 02.16.16
Software 2.2.4:

  • RS-232 control software for HDVS-RX. Program connected transmitters (AT-HDVS-TX-WP or HDVS-TX) to turn displays on/off with the push of a button, or control video and scaling on the HDVS-RX.
  • Install included font file to work with Windows 10

Click below for Support details