Creating a meeting space where teams can get together and discuss a project, or where presentations can be given by vendors still requires sophisticated AV systems, even though the environment isn’t the top-floor boardroom. Meetings can be ad hoc, so there is little time for fiddling with AV gear and settings. Also tight budgets don’t allow for a control system.
The AT-HDVS-200-TX auto-switching transmitter and AT-HDVS-200-RX scaling receiver is a complete system. It accommodates three input devices, and mounts discreetly under the meeting table, and provides volume control. The scaling receiver can be placed behind the display or at the projector. The HDVS 200 units utilize HDBaseT™ to extend AV signals, control, and Ethernet over a single category cable. At source plug-in, Atlona’s Advanced Automatic System Control turns on the projector, drops the screen, and scales the signal – all without any user input.
|4K/UHD Two or Three-Input Switcher / Transmitter|| 1 or 2 - HDMI|
1 - VGA / 3.5 mm audio
|1 - HDBaseT||Input from PCs with VGA or HDMI output. PoE-powered by receiver over distances up to 330 feet (100 m). Auto-switching between inputs. Ethernet connections for control and management. CEC, IP, and RS-232 display control. Wall plate only has one HDMI input.|
|AT-HDVS-200-RX||Scaler / Receiver|| 1 - HDBaseT|| 1 - HDMI|
2 - Balanced audio
|HDMI extension up to 330 feet (100 m) @ 1080p. Built-in scaler to match source signal to the display’s native resolution. LAN port extends Ethernet for control and management. CEC, IP, and RS-232 display control, plus contact closure control. Delivers PoE to eliminate local AC outlet at transmitter.|
|AT-PA100-G2||Audio Amplifier|| 1 - RCA L/R|
1 - 3.5 mm L/R
1 - Mic
| 1 - Stereo speaker|
1 - 3.5 mm loop
|Small, energy efficient, stereo / mono amplifier. Provides 2 x 20 W stereo or dual mono, 1 x 40 W bridged. Features two stereo line level inputs, one mic input with 48 volt phantom power, ducking, and RS-232 control.|